Wheat bulkheads are the most common food testing instruments used by food processing companies. Using wheat bulkheads to determine the bulk density of wheat can help us determine the grade of wheat and protect the common economic interests of farmers and food processing companies. In addition, in the production process, the wheat bulk density measured by the wheat bulkhead is also often used as an important basis for the company to calculate the powder rate. Therefore, it can be said that the wheat bulkhead is very important in the fields of food management and grain processing, but the most important It is also the wheat bulk density value determined by the wheat container weight, because only it accurately determines the result of the wheat bulk density, then these data are only meaningful for activities such as production and processing. Profile Material,Aluminium Profile Material,Profile And Material,Profile Angular Material Shandong Jianlong Steel Co. , https://www.jianlongmetal.com
The capacity cylinder is a very important part of the wheat weight tester. During the process of the wheat weight tester, the exhaust hammer interacts with the capacity cylinder to discharge the air in the capacity cylinder and improve the accuracy of the measurement data. Therefore, many people worry about it. With the prolongation of time, the exhaust hammer and the capacity cylinder rub against each other, which in turn causes the volume of the capacity cylinder to become large. From the actual application process, this concern is completely unnecessary. The first is the exhaust hammer and the capacity cylinder. The contact area between the spaces is very small, and the effect between them is relatively smooth, so the friction effect is actually not obvious. And from the actual measurement point of view, many years of use of the tolerance tube deviation is within the allowable range.
As an important instrument for metering, wheat bulkheads generally require calibrating at the specified time. Therefore, if any instrument accuracy or specification is found to be a problem in the verification process, calibration and improvement are required. Therefore, the user In the process of using the wheat bulkhead, it is absolutely necessary to worry about the problem of the capacity cylinder becoming larger due to wear. It is only necessary to complete the operation process and maintenance according to the specified requirements, so that the accuracy of the wheat bulkhead can be ensured.