Red & Blue Spot Point Warehouse Safety Light for Tow Tractor

Advantages For Led spot point forklift light:

• Wide operating voltage range: It can apply to different types of trucks, cars, and other vehicles
• High intensity CREE LED chips;
• Lamp body is faster radiating than aluminum,high temperature resistance,beautiful exterior;
• Lamp cover adopted imported pmma technology,good vitreousness,anti high/low temperature burs;
• Lamp reflector used optical reflectivity projector lens,long reflect distance;
• Fix device from Japanese airlines tighten technology,stainless steel,shakeproof,rustproof,water proof;
• Energy saving,high brightness,long lifespan,adopted japanese encapsulation technology;
• Universal for 9V-32V power sources;
• Life Span: more than ordinary led bulbs, more than 30000 hours;
• Excellent water-proof and shock-resistant aluminum housing;
• Dazzle soft light;
• Work in rain and difficult operation conditions;
• Easy to wire up, install and adjust.

When the LED Safety Warning Spotlight assembly is mounted to a forklift or other moving vehicle, it projects bright blue spot beam pattern on the floor surface. Since multiple lights can be mounted onto a single fork lift truck, the warning light spots can be seen behind or in front of the forklift. The bright light spot on the floor is clearly visible to pedestrians, machines and vehicles in the area, regardless of the ambient noise, alerting them to the nearby presence of the forklift. Traditional audio back up alarms can blend into ambient noise in the building and pedestrians can become immune to the audio warning.

            

Installation:
• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.     

Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.    

Advantages For Led spot point forklift light:

• Wide operating voltage range: It can apply to different types of trucks, cars, and other vehicles
• High intensity CREE LED chips;
• Lamp body is faster radiating than aluminum,high temperature resistance,beautiful exterior;
• Lamp cover adopted imported pmma technology,good vitreousness,anti high/low temperature burs;
• Lamp reflector used optical reflectivity projector lens,long reflect distance;
• Fix device from Japanese airlines tighten technology,stainless steel,shakeproof,rustproof,water proof;
• Energy saving,high brightness,long lifespan,adopted japanese encapsulation technology;
• Universal for 9V-32V power sources;
• Life Span: more than ordinary led bulbs, more than 30000 hours;
• Excellent water-proof and shock-resistant aluminum housing;
• Dazzle soft light;
• Work in rain and difficult operation conditions;
• Easy to wire up, install and adjust.

When the LED Safety Warning Spotlight assembly is mounted to a forklift or other moving vehicle, it projects bright blue spot beam pattern on the floor surface. Since multiple lights can be mounted onto a single fork lift truck, the warning light spots can be seen behind or in front of the forklift. The bright light spot on the floor is clearly visible to pedestrians, machines and vehicles in the area, regardless of the ambient noise, alerting them to the nearby presence of the forklift. Traditional audio back up alarms can blend into ambient noise in the building and pedestrians can become immune to the audio warning.

            

Installation:
• Suggested wiring is to ground the black wire and connect the red wire to the strobe light's positive wire.  The current draw is minimal enough that the wire should be able to handle it just fine.  You can also connect the forklift bluespot to the reverse alarms positive wire if you would like it to only be on while in reverse or if you lack a strobe light.  Ideally though, you would want it on constantly for pedestrial safety.
• Typically, the forklift bluespot is mounted to the overhead guard near the strobe or rear work light.
• It is recommended to focus the spot about 7-8 feet from the rear of the forklift.     

Maxtree Service:
Forklift Safety Light OEM and ODM is available. We can make the lights as your requirements , like print your logo on the lights. As long as your orders is big enough.    

Automatic Lifting Bin Blender

The machine is provided with such functions as automatic lifting, mixing, lowering, etc. A bin mixer and variety mixing bin of different specifications ,it can meet the mixing requirements of different batches and diversified varieties of products. It is an ideal machine for mixing in pharmaceutical plants. It is also widely used in such industries as medicine, chemical industry, food, etc.

Features:

●This machine is a new model that our company has extensively absorbed and digested foreign advanced technology, successfully developed in combination with national conditions. Reasonable structure, stable performance, convenient operation, no dead corners, and no exposed bolts.

●The rotating body (mixing bin) symmetry plane is at an angle of 30°to the rotation axis. The materials in the mixing bin rotate along with the rotating body and make tangential movement along the hopper walls, producing strong turning and high-speed tangential movement and achieving the best mixing effect.

●It adopts PLC automatic control . It is provided with the infrared safety device and the discharging butterfly valve with the misoperation preventer to ensure safe production.

●One machine can be equipped with bins of various specifications and quantities.

●The machine effectively controls dust pollution and cross contamination, reduces loss of materials, controls material layering, optimizes production processes.

●Meet GMP requirements.

Working Principle:

The machine is composed of two machine bases, rotation frame, rotation system, lifting system, control system, etc. Push the mixing bin into the rotation frame and complete the positioning. Start the control system to lift the rotation frame to the mixing height and clamp it reliably. The driving system will carry out automatic mixing according to the set time, rotation speed and other data. After the mixing operation is finished, the rotation frame will stop vertically, the bin will automatically fall to the ground, the machine will stop and process data will be printed. The bin is transferred to the next procedure.

Automatic Lifting Bin Blender,Automatic Lifting Blender Bin,Automatic Bin Blender Machine,Automatic Bin Blender

Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jyjiruimachine.com