High-low temperature damp heat test box compressor oil filter troubleshooting method High and low temperature damp heat test box compressor oil filter troubleshooting approach, oil filter is through the oil and air compression, separation, after cooling in the cooler, and then back In the oil and gas tank, the oil filter passed before the oil and gas tank filters out impurities to ensure that no impurities are introduced into the machine head to prevent the occurrence of phenomena such as clogging of the nose with excessive impurities. This is the result of oil filtering. effect. For the treatment of oil filter failures, the compressor repair sums up such points briefly today. I Casting Radiant Tubes,I-Casting Radiant Tubes,I Casting Radiant Tubes For Furnaces,I Casting Radiant Tubes In Concrete Jiangsu Kinuo Furnace Roller Co., Ltd. , https://www.jskinuoroller.com
First, check whether the machine can operate normally or if it is abnormal. If there is no noise in the sound of the oil filter, the oil filter is normal.
If there is an abnormal sound from the oil filter, stop the machine at this time, then remove the oil filter and perform a certain test on the oil filter.
The oil filter is likely to accumulate a lot of different impurities when filtering oil and gas impurities, so be sure to replace the oil filter with a period of time.
When cleaning the oil filter, it is necessary to wash it with special medicine. This can ensure that the oil filter can clean the dirt inside.
Screw compressor is a common compressor in the compressor. The failure of the screw compressor will affect the service life and the operator's personal safety. Therefore, in the industrial production, understand the screw compression. The problem of machine failure and the solution to it are very important.