Shishi Polyacrylamide Solubility in Wastewater Treatment AAA Grade Enterprise in Henan Water Purification Industry

Water treatment agent polyacrylamide easily soluble in cold water, the molecular weight of the water temperature will not be too obvious, when the concentration of high-molecular-weight polyacrylamide gel is more than 10% gel, in the sewage treatment Will affect the use of effects, improve the dissolved water temperature can promote the dissolution of the water temperature standard requirements can not exceed 60 °, to avoid the occurrence of dissolved in the process because the natural temperature caused by high water temperature degradation effect.
In the water treatment agent industry, in order to be able to fully dissolve polyacrylamide PAM in a short time, its appearance is flake or granular, its dissolution time should not be less than 1 hour, and it can also be processed into powder for its dissolution time. In 20 minutes, PAM molecular weight between 5 million and 25 million for our customers to choose more water quality requirements.
There are two ways to accelerate the dissolution of polyacrylamide:
First, increase the dissolution rate of polyacrylamide can increase dissolved water temperature to accelerate the dissolution, the general dissolution time will be reduced by nearly 30%.
Second, if there is no adjustment to the dissolved water can be dissolved PH value is adjusted to weakly alkaline can also accelerate the PAM dissolution time, but the PH value is greater than 10.5, the polyacrylamide will appear to be hydrolyzed, its molecular weight will affect the use of effects.

Henan Hengsha Water Purification Material Co., Ltd.

Q Q
Mobile phone 15237179717
Telephone Fax Website: http://
Address: Economic & Technological Development Zone, Yong'an Road, Gongyi City, Henan Province


Wire Annealing Furnace

First, the use of vacuum annealing furnace

This equipment is used for pre-vacuum nitrogen protection annealing heat treatment of carbon steel wire.

Second, the equipment composition

The well type resistance furnace mainly comprises: a furnace body, a furnace shell(tube), a furnace cover and a lifting mechanism, a furnace lining body, a heating element and a fixing device, and a furnace temperature control system.

Third, the main technical performance indicators (design parameters)

3.1, stainless steel inner tank size: diameter 1750mm X height 2100mm

3.2, rated heating power: 270KW

3.3, rated temperature: 800 ° C

3.4, heating mode: 3 zone control, power supply ~ 380V, frequency 50Hz, star-shaped connection

3.5, heating element: material is 0Cr25Al5 resistance band

3.6, temperature measurement point temperature control accuracy: ≤ ± 1 ° C

3.7, Work area temperature field uniformity: ≤ ± 10 ° C

3.8, furnace out-wall temperature rise: ≤ 40 ° C

3.9, lining form: refractory fiber

3.10. Seal between furnace cover and furnace body: labyrinth sand seal

3.11, furnace cover opening mode: electric lifting


Wire Annealing Furnace,Copper Wire Annealing Furnace,Custom Made Annealing Furnace,Stainless Steel Wire Annealing Furnace

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com