The hollow brick machine is a brick machine used to produce hollow blocks. The blocks produced by the brick machine do not need to be burned, and can be used after natural curing to reach a certain strength. The hollow non-burning brick machine has the characteristics of structure, high pressure, high yield, strong rigidity, good elasticity, fully enclosed automatic circulation lubrication, and automatic quantitative feeding. The main raw materials for the production of hollow brick machine come from river sand, fly ash, slag, tailings, gangue, etc. It can press cement bricks, refractory bricks, and non-fired bricks. The pressed bricks fully comply with national standards. National construction needs and has significant social benefits. The use of this equipment and process technology can turn waste into treasure, save energy and reduce consumption, protect land, save cultivated land, and benefit after it is of great significance. Using this equipment will bring you surprises and Considerable economic benefits. Hollow Block Machine,Maunal Hollow Block,Hollow Brick,Hollow Block Making Machine Zhengzhou SMART Machinery Manufacture Co.,Ltd , https://www.simamax.com
The advantage of using hollow non-burning brick machine: the production raw materials use factory waste, fly ash, construction waste and other waste materials, which replaces the traditional brick machine production and use a large amount of land, because the hollow brick protects the precious land of our country, and at the same time realizes the renewal Utilization, and the performance of hollow bricks is more suitable for construction use than clay bricks, which is why the country also advocates the development of the hollow brick market.
The hollow brick machine is a brick machine used to produce hollow blocks. The blocks produced by the brick machine do not need to be burned, and can be used after natural curing to reach a certain strength. The hollow non-burning brick machine has the characteristics of structure, high pressure, high yield, strong rigidity, good elasticity, fully enclosed automatic circulation lubrication, and automatic quantitative feeding. The main raw materials for the production of hollow brick machine come from river sand, fly ash, slag, tailings, gangue, etc. It can press cement bricks, refractory bricks, and non-fired bricks. The pressed bricks fully comply with national standards. National construction needs and has significant social benefits. The use of this equipment and process technology can turn waste into treasure, save energy and reduce consumption, protect land, save cultivated land, and benefit after it is of great significance. Using this equipment will bring you surprises and Considerable economic benefits.
LED industry is expected to enter the stage of comprehensive replacement of traditional lighting
June 10th is the national low-carbon day. As the pressure on energy conservation and emission reduction continues to expand, the low-carbonization in various fields is also deepening. Xie Zhenhua, deputy director of the National Development and Reform Commission, said at the 5th Tiantan Forum on the morning of the 9th that China’s energy conservation and emission reduction schedule lags behind expectations. It is necessary to continue to work hard to achieve the set goals. The next step is to strengthen financial support and tax incentives for energy-saving and low-carbon enterprises. In the field of energy-saving electricity, the substitution effect of LED is outstanding. According to reports, China and the United Nations Development Program and the Global Environment Facility have carried out China’s phase-out of incandescent lamps and accelerated the promotion of energy-saving lamps (hereinafter referred to as Pileslamp). In the past five years, the annual production capacity of incandescent lamps has been eliminated by the end of 2009-2013, about 650 million. At the time, the output of incandescent lamps in the country was 16. The deputy director of the project's project office, Lu Fang, told the Shanghai Securities Journal that the next step would be to speed up the replacement project according to the national phase-out roadmap. The reporter further learned from the Pileslamp Project Office that the subsidy policy for energy-saving lamps from 2008 will be completed by the end of this year. At present, the National Development and Reform Commission, the Ministry of Finance and other departments are studying the policy of financial subsidies to promote LED lighting products. The form and intensity of subsidies will promote energy-saving lamps. On the basis of the adjustment, the characteristics of the LED lamp are adjusted accordingly. According to reports, the life of energy-saving lamps is more than 6000 hours, which is 6 times that of incandescent lamps. It can save 60% to 80% of electricity instead of incandescent lamps. The life of an LED lamp is about three times that of an energy-saving lamp, and the power consumption is only about 60%. Xie Zhenhua introduced at the launching ceremony of the project that the phase-out of the incandescent lamp project is expected to directly save about 4 billion kWh of electricity and 4.4 million tons of carbon dioxide emission reduction capacity. After the end of the project, carbon dioxide emissions will be reduced by 1.75-2.37 billion tons. In recent years, carbon emission constraints have tightened. The roadmap for the phase-out of incandescent lamps released by the country in 2011 shows that from October 1 this year, the import and sale of ordinary lighting incandescent lamps of 60 watts and above is prohibited. As the roadmap approaches the mid-term evaluation time, the elimination rate will be further accelerated. An LED listed company executive told the Shanghai Securities Journal that last year the national lighting market totaled 260 billion, nearly 80% of the energy-saving lamps, according to the LED market share of 20-30 in 2015, LED potential is huge. Since energy-saving lamps contain mercury and are not environmentally friendly, many local governments have already cancelled subsidies for energy-saving lamps. The cost-effectiveness and environmental protection effects of household lighting LEDs have been fully reflected. Now, LED subsidies are expected to be introduced in time. He said. According to industry analysts, the LED industry boom began to pick up last year. The price of 5W LED lamps was 3-4 times that of the same brightness energy-saving lamps a few years ago. However, in recent years, the price of upstream chips has dropped at a rate of about 30 per year, and the cost has dropped to 2013. The price of LED terminal products is basically the same as that of energy-saving lamps, and the LED industry is expected to enter a stage of comprehensive replacement of traditional lighting products.
The advantage of using hollow non-burning brick machine: the production raw materials use factory waste, fly ash, construction waste and other waste materials, which replaces the traditional brick machine production and use a large amount of land, because the hollow brick protects the precious land of our country, and at the same time realizes the renewal Utilization, and the performance of hollow bricks is more suitable for construction use than clay bricks, which is why the country also advocates the development of the hollow brick market.