On October 16, 2015, Shanghai Institute of Electrical Engineering held a conference on the identification of scientific and technological achievements in Shanghai. The key technologies for modeling, analysis and control of EHV AC / DC hybrid power grids in China are shouldered by the State Security and Stability Control Technology Branch of NARI Power Grid. Research and application of "scientific and technological projects through the identification. Accreditation Committee agreed that the research results are generally in the international advanced level, which applied to UHV AC-DC interaction study of electromagnetic transient general modeling technology, UHVDC quasi-steady-state modeling method to suppress DC commutation failure of the dynamic Power compensation device optimization configuration and DC control parameters optimization method is in the leading international level. "Research and Application of Key Technologies for Modeling, Analysis and Control of UHV AC / DC Hybrid Power Grids in East China" The science and technology project was launched in February 2014 to establish an all-round and comprehensive technology system for AC / DC hybrid power grids with a focus on UHV AC / DC Hybrid power grid modeling and simulation technology, UHV AC / DC hybrid power grid security and stability analysis and control technology, UHV AC / DC hybrid power grid frequency modulation and frequency modulation coordinated control technology and UHV AC / DC hybrid power grid equipment operation technology four major issues. The project has made a number of innovative achievements and comprehensively analyzed the challenges to the safe and stable operation of East China Power Grid. It also studied and formulated corresponding safety control strategies to enhance the technical level of power system analysis and ensure the safe and stable operation of UHV AC / DC hybrid power grids. After the UHV network security and stability of the national grid to provide technical support. A number of achievements have been applied in the Binjin UHVDC Project, Zhejiang Ford High Voltage AC Project and the on-line system, which effectively ensured the smooth operation of the Binjin UHV DC Project and Zhejiang Ford UHV AC Project. Round Open Water Cooling Tower The whole structure is solid and light;the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics),never being corrosive. The surface finish is added with ultraviolet inhibitor,which can resist sunshine attack and damage.
Apply special design PVC water block curtain (water-stop) to prevents plashing) remarkably; pressure drop loss is slight and splashing loss i under 0.001%.
Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.
Round Open Water Cooling Tower,Water Cooling Tower,Round Cooling Tower,Cool Water Towers Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com
All steel and iron material is processed through galvanizing by dipping,Ocorrosion resisting and durable.
Special designed axial-flow type air blower applies belt reduction gear,reducing low noise and sufficient wind; tailor-made water-drop noise
reduction carpet to eliminate water sound.
Water pond applies slant design, easy to wash, containing less water; the operating weight is lower, but the water tank is very big, so it won't absorb air.
The cooling tower support is light and solid, convenient to assembly no matter there is suspension iron rack or not.