1. Hazard source: Open two dampers at the same time. Description of risk and its consequences: It is easy to cause short circuit of wind current, and there is no wind or breeze in local area. Pre-control measures: During the process of transporting equipment, when passing a damper, the other damper must be closed. It is forbidden to open two dampers at the same time. 2. Hazard source: The surrounding environment has not been checked. Description of risks and consequences: It is easy to bruise or bruise the driver of the Promise Rope. Pre-control measures: Check the safety of the top support within 5m of the environment around the endless rope car. The wire rope is free from obstacles and easy to operate and overlook. 3. Hazard source: No safety inspection has been carried out. Description of risks and consequences: Easy to cause accidents. Pre-control measures: Check that the brake and clutch brakes are intact and not broken, and the wear is not over-limit. The bolts, pins, tie bolts, back limit pin heads, rope skin and depth indicator are all intact and without bending. , deformation, there must be a protective net in front of the endless rope car. 4. Hazard source: No wire rope inspection. Description of risks and consequences: It is easy to cause wire rope strain or sports car injury. Pre-control measures: The wire rope must meet the requirements, no broken wire, broken strands, bent, knotted, and fixed on the rope end of the drum. 5. Hazard source: There are pedestrians in the track lane during the transportation of the bracket. Description of risks and consequences: It is prone to vehicle injuries. Pre-control measures: During the transportation of the brackets, each person in the mouth will be placed in a warning, and any casual personnel are strictly forbidden. 6. Hazard source: The driver is not sent according to the specified signal. Description of risks and consequences: 1 It is easy to cause accidental pulling and causing accidents; 2 It is impossible to stop in time after an accident, so that the accident will expand. Pre-control measures: Signals must be transmitted accurately and correctly to ensure the normal operation of the vehicle. 7. Hazard source: The winch leaves the console during operation. Description of risks and consequences: It is easy to cause problems and cannot stop in time. Pre-control measures: During the operation of the stepless rope car, the operator must not leave the console. 8. Hazard source: The poleless rope car does not implement the remote operation button. Description of risks and consequences: It is easy to cause problems and cannot stop in time. Pre-control measures: The poleless rope car must be remotely controlled, and the switch is prohibited from direct operation. 9, the source of danger: driving when pedestrians. Description of risks and their consequences: those who are prone to bruises or crush injuries. Pre-control measures: pedestrians are strictly prohibited when the winch is running. 10. Hazard source: The lifting speed is not stable. Description of risks and their consequences: Easy to cause a drop or rollover accident. Pre-control measures: During the process of transporting the bracket, the speed should be slowed down. Gearbox Transmission,Car Gearbox Assembly,Transmission Gearbox,Auto Transmission Gearbox ShaoXing Change Auto Synchronizer Ring Co.,Ltd , https://www.sxcjautoparts.com
Identification of Hazard Sources for Tracks and Lanes in Mining Areas
Identification of Hazard Sources for Tracks and Lanes in Mining Areas