How to maintain the compressor of the thermal shock test chamber The second step: a, pay attention to the temperature rise of the motor, bearing temperature and voltmeter, ammeter indicates that the situation is normal, the current must not exceed the rated current of the motor, if exceeds, find the cause or stop the inspection; Xiaomi Mi TV Telivision and Mi TV Box Stick Accessories
Xiaomi Youpin High Quality_High-quality full-screen TV is waiting for you, 4K ultra-clear picture quality, you can see every detail, a large number of audio and video resources can be selected at will, and the intimate eye protection mode will protect the health of the whole family!
The xiaomi Mi TV stick is pre-installed with a TV operating system based on Android 9.0, which can output 4K HDR content and support Dolby and DTS HD dual decoding
Xiaomi MI TV,Mi TV,Mi TV Box,Mi TV Stick,Mi TV Soundbar Shenzhen Newway Technology Co., Ltd. , https://www.sznewway.com
a. Carefully check the sound of movement of cylinders and moving parts at all levels. Determine whether the work sound is normal according to “listeningâ€. If abnormal sounds are found, check immediately to stop;
b. Pay attention to the indications of pressure gauges, oil pressure gauges and lubricating oil pressure gauges at all levels of pressure gauges, and whether they are within the specified range;
c, check the cooling water temperature, flow is normal;
d. Check the lubrication of the hot and cold impact tester and the lubrication system of the moving mechanism. (Some compressors have plexiglass baffles on the side of the crosshead guide of the fuselage. You can see the crosshead movement and the lubricant directly. Supply conditions); cylinders, packing can be used for one-way cutting oil inspection, you can check the oil injector to the cylinder of oil;
e. Observe whether the oil level in the oil sump of the fuselage and the lubricator in the lubricator are lower than the tick mark. If it is low, add it in time (check with the dipstick to stop);
f. Feel the temperature of the intake, exhaust, etc. at the fuselage cross-rail of the crankcase by hand.
b. Always check whether there are any foreign matter or conductive objects in the motor. Whether the coil is damaged or not, and whether the stator or the rotor has friction, otherwise the motor will be burned out after the motor is started.
c. If the water-cooled compressor can not immediately enter the water if the water is cut off, avoid cracking of the cylinder due to uneven cooling and heating. After parking in winter, the cooling water should be drained to avoid freezing and cracking in the cylinder and the like;
d. Check whether the compressor is vibrating and whether the anchor screw is loose or missing.
eã€Check the pressure regulator or load regulator, and whether the safe cutting is sensitive;
f. Pay attention to the sanitation of the compressor and its associated equipment and environment. Gas tanks, coolers, and oil-water separators must always release oil and water.
g. The lubricating machine used in the hot and cold impact tester should be precipitated and filtered. Compressor oil in winter and summer should be used differently.