For all the fans and pumps after the repair of the short-wave transmitter, they must be cleaned and tested so that they are in good condition before being put on the machine. The specific practices are as follows: (1) Each fan and water pump has its own card, the card is managed uniformly, and it is filled in time. The use and maintenance of each equipment must be filled in truthfully for easy use and maintenance. (2) All fans and pumps should be placed in a dry, ventilated and clean place to ensure that the inlet and outlet of the pump are sealed and sealed to prevent foreign matter such as insects from entering and blocking the water channel of the transmitter. (3) All fans and pumps are equipped with dust covers to ensure their cleanliness so that they can be put on the machine at any time. Because it is located in the north, it is dry and rainy all year round, and the dust is large. The gap of the condenser fin is very small, and the operation is for a period of time. Usually, the gap is blocked by dust, resulting in poor ventilation, resulting in a decrease in cooling effect. This requires periodic cleaning of the condenser fins. The cleaning method is to use a high-pressure water gun first. Rinse the condenser fins from the bottom and then from the top. Pay attention to protect the fan during the flushing process to avoid water in the fan and reduce the insulation, which will cause the fan package winding to burn after power-on. After the cleaning is completed, a large amount of clean water will remain in the gap of the fin. If it is directly put into operation, the gap will be blocked and the air will be blocked. It may also cause the fan to enter the water. In order to avoid the above situation, the fan power supply should be inverted to make the fan reverse. After a while, after blowing off the clean water in the gap, the fan power supply is restored to normal, effectively solving the above problems.
Zowell 1.5 ton Electric Reach Truck is standard with EPAS system. It is more comfortable to operate and the machine is widely used in the food, medicine, tobacco, textile and car manufacturing industry. It is the best choice for the customer who needs the short length and high lift capacity. Combined with the powerful components and first class spare parts make sure the electric reach truck have best performance.The electric reach stacker/truck combines the advantages of counterbalance electric forklift and stacking truck, which has the characteristics of environmental protection, energy saving, low noise, high lifting and working in limited space.
Detail features of Zowell reach trucks:
Electric reach truck,reach mast forklift, electric forklift machine, electric reach forklift Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com
Operation in confined space.
Supper Low and non-slip step makes operation more convenient and safe.
Abundant storage space such as cup holder and file folder,makes the forklift more hunmanized.
Smart Instrument shows all the running status of forklift like the driving wheel position, battery level,error code,etc
Thrust replacement for battery makes it easy to keep maintenance.
Multi-valve operation with hydraulic level can achieve accurate control.
Speed-limiting function for steering,stops the truck turning over when turning.
Double AC Curtis controllers ensure reliable performance.
Using full AC maintenance-free driving motor and lifting motor, maintenance cost is lower.
LED headlight provides more strong light source.
EPAS( Electrical Power Assistance Steering) with small -diameter steering wheel makes it easy
to operate
Floating rear suspension-wheel structure makes it suitable for working in different floor