Hywell Machinery company proffesional to design and manufacture the Granulator and Coater and lab Granulator and Coating Machine and Fluid Bed Coater, welcome to contact us and we will offer competitive price !
Granulating and Coating machine main function that use to make the power into granules and coating . one set machine can reach the two function of granulating and coating .this granulator and coater main use for the instant dissolution food and medicine granules. The loading and unloading are quick, light and clean, meet the requirements of GMP.
Granulator and Coater Granulating Coater Machine,Powder Granulator Coater, Coating Machine,Fluid Bed Coater Changzhou Hywell Machinery Co,.Ltd , https://www.hywell-dryer.com
First, the parking lot system equipment line inspection Parking lot system belongs to the mechanical and electrical equipment, is through a variety of cables to connect electrical appliances and electronic components, with strong and weak parts, it is recommended to check from the strong electricity to see if the supply voltage is For 220v, that is, a FireWire and a Neutral, it is best to use a multimeter to test, because in the construction, there are many three-phase lines, there may be two FireWire, the voltage is 80V, very important, almost all of this The reason is that the electrical equipment is burned out, and then whether the line is connected according to the circuit diagram is checked. The weak part of the communication line of the CAN bus is positive and negative, and whether the weak electrical equipment line is connected correctly. After the inspection is completed, the system can be powered on.
Second, the parking lot equipment power check After checking the line is correct, you can power up. After the power is turned on, check whether all the electromechanical devices are normally started, the power is normal, and the weak current system communication function is normal and connected to the network.
Third, the parking lot system equipment parameter setting After rectifying the parking lot system all can normally energize, can according to the actual demand carries on the correlation equipment parameter establishment, specifically has the toll management system establishment, the number of parking spaces, the communication protocol port, the administrator authority , Fees; exit gate control machine (ticket box) settings: address code settings, vehicle detector sensitivity.
four. After the parameters of the parking lot system operation detection equipment are set, the parking lot system will be run in a continuous manner, and the entire system will be detected through access, such as the opening of the gate, the exit of the ticket box, the card billing, image recording, and data query. If problems are encountered and adjustments are made in time, the system can be officially put into use until the system can complete the parking charge management system in a stable and efficient manner.
Car park management system to be ready for trial operation
The parking lot management system is an important part of the weak current intelligent project. It is relatively systematic and professional, and video surveillance, building intercom, burglar alarm, audio and video public broadcasting and other systems form an intelligent project together. The parking lot system manages Vehicle access and toll management in the entire building area ensure that the normal and stable operation of the parking system is important. Therefore, after the construction of the parking lot is completed, it is necessary to conduct a comprehensive inspection and commissioning. What are the steps for commissioning the parking management system? What?