Analysis of Gas Control of Plants Grown in Greenhouse by Carbon Dioxide Recorder

How does the carbon dioxide recorder detect gas content? The cultivation of greenhouses has been prevalent in many parts of the country. Because the weather is uncontrollable, people think of using greenhouses to regulate the growing environment of plants in real time. For example, temperature, humidity, carbon dioxide content, and light intensity are all plant growth parameters. Can be controlled, in the greenhouse, carbon dioxide is too much or too little for the plants are unfavorable, which requires us to use the carbon dioxide recorder to measure.
First, the time and method of carbon dioxide fertilizer The general time in the half-hour to 1 hour after the curtain was opened, to the end of the morning n points, a total of 2 to 3 hours. As the curtains are opened in the morning, the zucchini starts its photosynthesis, but the light is weak and the photosynthesis is weak. As the sun rises, the light intensity increases, the photosynthesis starts to strengthen, and the carbon dioxide concentration in the shed drops rapidly. At this time, carbon dioxide is applied. Specific usage: Hang a plastic bucket on the column every 6 to 7 meters in the east-west direction of the greenhouse. The barrel contains 2/3 volume of dilute sulfuric acid solution. Then a certain amount of carbon ammonia is weighed into a small plastic bag, tightly sealed, and 3 to 4 small holes are put on the bag and put into the barrel. The bag is pressed into the bottom of the barrel with a heavy object. Sulfuric acid and carbon ammonia The reaction emits carbon dioxide gas.
Second, topdressing the principle of carbon dioxide fertilizer 1. After cocoon Zucchini fruit set, gradually increase with the expansion of leaf area coefficient.
2. It should not be applied when the soil temperature in deep winter is not higher than 13°C. Put a barrel every 7 square meters before the Spring Festival. Each barrel can contain 150-250 grams of carbon ammonia, so that the carbon dioxide concentration in the shed can reach 800-1200 Ppm. After the Spring Festival, the ground temperature increases, and the high yield period of the squash is more appropriate. , 250-350 grams of carbon ammonia can be placed in each barrel, so that the carbon dioxide concentration in the shed reaches 1300-1600 ppm.
3. It depends on the plant to bear more fruit for a long time. If vegetative growth is too prosperous, use less or less if there are fewer results.
4. It is necessary to apply in sunny and warm weather. It is not suitable for rainy and snowy weather and it should not be used in the afternoon. After 50 years and 70 days after the first year, no further application is required.
The above is about some issues that farmers have to pay attention to carbon dioxide. Using carbon dioxide recorders to detect plants in greenhouses can better promote plant growth, improve plant quality and yield.

our dished heads are used in a variety of applications and industries such as storage tanks, pressure vessels, road tank, food processing operations, chemical plants ,Nuclear operation, Oil Refining, Architectural feature, power generation.

Due to our forming experience and equipment, we can spin or press the first part of the process of forming your products, It depend on the thickness and material performance,

Our main products are 2:1 SE dished heads, Torispherical heads, Cones,Hemispherical Heads etc

Choosing the right type is the key decision for each customer and one for which our experience team to happy to give advice, simple speaking, the torispherical heads, the less ressure it can withstand, Conversely, the deeper dished heads, for example Elliptical heads, hemispherical, the greater pressure it can take.

Our in house-capability to form dished heads by cold press brings major benefits to our customers and sets us apart from others dished heads manufactures

For carbon steel dished heads, we can forming this dished heads from 76-9000mm in diameter and below 250mm in thickness  

The general forming process as the below sketches forming process

Technical Delivery Condition
1,Our material (hot Rolled Unalloyed structural steel, high and low temperature steel, High Alloy steel)
We have no carbon steel plates in our stock and most of plates are from Chinese steel market or mill. Meanwhile As Japanese owed company, We can also source the plates from Japanese ex-mill if end user can`t accept ex-chinese mill.
Basically the delivery time shall be below 20days for dished heads if plates are from steel market. and Max plates width from them is below 2200mm. it means that the seamless dished heads diameter shall be below about 1800mm.
The max width CS plates that Chinese mill can do is below 4700mm,and dished heads can be seamless below 3800mm in
diameter.


2,Enquiry/order required information

We can give our clients once they gave us the below information

But if clients tolerance is higher than below Hokkai standards, it shall be provided to Hokkai prior to offer or ordering.

Enquiry/order required information

Carbon Steel Dished&flared Head

Carbon Steel Dished&flared Head,Dish Flared Dish Head,Carbon Steel Flared Head,Steel Dished Flared Head

YIXING HOKKAI HEAD PLATE CO.,LTD , http://www.hokkaidishedend.com