Defoamer, silicone defoamer, defoaming agent, bubble defoaming, silicone antifoam, antifoam emulsion, defoamer agent, defoamer chemical, silicone antifoam,
Defoaming agent for metal working: silicone defoamer for Metal cutting fluid, silicone defoamer for metal cleaning.
silicone defoamer for textile sizing, silicone defoamer for high temperature printing and dyeing, silicone defoamer for
Defoamer, silicone defoamer, defoaming agent, bubble defoaming, silicone antifoam, antifoam emulsion, defoamer agent, defoamer chemical, silicone antifoam Luckypower Tech , https://www.czluckypowertech.com
Fault Cause Remedy insufficient flow or no water [1], reverse impeller malfunction the reason Method of exclusion Low or no water flow 1, impeller reversed
2, the flow blockage
3, the motor speed is not enough
4, pumping medium concentration is too large
5, head is too high 1, adjust the impeller rotation direction
2, remove debris
3, check the power supply voltage and frequency
4, diluted with water dilute concentration
5, change the pump or reduce head ã€Can not start】 1, lack of phase
2, impeller stuck
3, winding, connector or cable break
4, the stator winding burn out
5, electrical control failure 1, check the line, to repair
2, remove debris
3, check with ohmmeter repair
4, to repair, replace the winding
5, check the controller, repair or exchange Stator burned 1, two-phase operation
2, pumping medium concentration is too large
3, the impeller stuck or loose
4, seal damage to the motor water
5, loose fasteners cause the motor water 1, 饲 逑 chanting punishment fine income
2, diluted with water
3, remove dirt, tighten the nut
4, replace the mechanical seal
5, tighten the various bolts ã€Overcurrent】 1, working voltage is low
2, pipes, impeller blocked
3, pumping liquid density or higher viscosity 1, adjust the working voltage
2, clean up the pipeline and impeller blockage
3, change the density or viscosity of pumping liquid
2, the flow blockage
3, the motor speed is not enough
4, pumping medium concentration is too large
5, lift too high 1, adjust the impeller rotation direction
2, remove debris
3, check the power supply voltage and frequency
4, diluted with water dilute concentration
5, to change the pump or lower head [can not start] 1, lack of phase
2, impeller stuck
3, winding, connector or cable break
4, the stator winding burn out
5, electrical control failure 1, check the line, to repair
2, remove debris
3, check with ohmmeter repair
4, to repair, replace the winding
5, check the controller, repair or exchange ã€Stator burnout】 1, two-phase operation
2, pumping medium concentration is too large
3, the impeller stuck or loose
4, seal damage to the motor water
5, loose fasteners caused by motor water 1?
2, diluted with water
3, remove dirt, tighten the nut
4, replace the mechanical seal
5, tighten the bolts Bolt [current is too large] 1, the working voltage is low
2, pipes, impeller blocked
3, pumping liquid density or higher viscosity 1, adjust the working voltage
2, clean up the pipeline and impeller blockage
3, change the density or viscosity of pumping liquid
Defoaming agent for textile production:
Textile auxiliaries, silicone defoamer for textile softener flake.
Defoaming agent for paper making: silicone defoamer for chemical pulping, Antifoam agent for papermaking whitewater.
Defoaming agent for coating and painting: Defoamer for water-based adhesive,Defoamer for expoxy floor coatings,Defoamer agent for oil based coating and painting.
Defoaming agent for pesticides: silicone defoamer for pesticides, polyether defoamer for foliar fertilizer, silicone defoamer for pesticides (solid powder), polyether defoamer
Defoaming agent for water treatment: a new type silicone defoamer specially for water system. Which has excellent acid and alkali resistance, can be used in wide range of PH, has the faster defoaming speed and longer bubble control effection than the average ones. Low viscosity and easily dispersing in water, especially suitable to the bubble defoaming requirements in non-ionic and anionic water based surfactant .
Defoaming agent for fermentation:
Defoaming agent for concrete: