High speed door
Hongfa fast shutter doors by the Division we learn from foreign advanced technology and equipment , and to draw on the advantages of similar products in domestic self-developed high-tech products , with insulation , insects, wind , dust, noise, anti-odor, lighting and many other features , the high speed door can be widely used in food , chemical , textile , refrigeration , electronics , printing , assembly , precision machinery , logistics . warehousing and other places , the high speed rolling shutter door Can be extremely satisfying frequent high-performance logistics and clean place with a variety of needs and saving energy , increasing air-conditioning effect , fast closing , improve operational efficiency and create a better work environment
PVC High Speed Rolling Door, car wash doors, PVC high speed garage doors, high speed fabric garage doors, fast roll up garage doors SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrs.com
At present, China has a material commonly used screw 45 steel, 40Cr, ammoniation steel, 38CrMOAl, high-temperature alloys.
1) 45 steel cheap, processing performance, but poor corrosion resistance wear.
Heat treatment: quenching HB220-270, induction hardening HRC45--48.
Performance
2) 40Cr steel is better than 45, but often coated with chromium to improve their resistance to corrosion and wear. But require a higher layer of chrome coating is too thin easy to wear, thick is easy peeling, flaking but accelerated corrosion, has been rarely used.
Heat treatment: quenching HB220-270, hard chrome plating HRC> 55
3) nitriding steel, 38CrMoAl relatively excellent overall performance, used widely. Usually the nitride layer of 0.4-0.6 mm. But this material ability to resist corrosion of hydrogen chloride is low, and the price is higher.
4) high-temperature alloy material is superior to other materials, the material without coating, injection molding machine is mainly used for raw halogen-free screw, the material is anti-oxidation high corrosion resistance, heat hra55`60.
Quenched HB220-270, nitriding HRC> 65
Titanium carbide coated foreign helpful ways to improve the corrosion resistance of the surface of the screw, but it was reported that its abrasion resistance is not good enough.
Foreign taken a series of measures in improving the screw wear corrosion resistance. One approach is the use of highly wear-resistant alloy steel. As 34CrAlNi ,, 31CrMo12 like. There take the screw surface coating Xaloy alloy method. This Xaloy alloy with high wear and corrosion properties.
Common MaterialsÂ
At present, China has a material commonly used screw 45 steel, 40Cr, ammoniation steel, 38CrMOAl, high-temperature alloys.
1) 45 steel cheap, processing performance, but poor corrosion resistance wear.
Heat treatment: quenching HB220-270, induction hardening HRC45--48.
Performance
2) 40Cr steel is better than 45, but often coated with chromium to improve their resistance to corrosion and wear. But require a higher layer of chrome coating is too thin easy to wear, thick is easy peeling, flaking but accelerated corrosion, has been rarely used.
Heat treatment: quenching HB220-270, hard chrome plating HRC> 55
3) nitriding steel, 38CrMoAl relatively excellent overall performance, used widely. Usually the nitride layer of 0.4-0.6 mm. But this material ability to resist corrosion of hydrogen chloride is low, and the price is higher.
4) high-temperature alloy material is superior to other materials, the material without coating, injection molding machine is mainly used for raw halogen-free screw, the material is anti-oxidation high corrosion resistance, heat hra55`60.
Quenched HB220-270, nitriding HRC> 65
Titanium carbide coated foreign helpful ways to improve the corrosion resistance of the surface of the screw, but it was reported that its abrasion resistance is not good enough.
Foreign taken a series of measures in improving the screw wear corrosion resistance. One approach is the use of highly wear-resistant alloy steel. As 34CrAlNi ,, 31CrMo12 like. There take the screw surface coating Xaloy alloy method. This Xaloy alloy with high wear and corrosion properties.
Material Selection:
1. Frame: 2MM thicknesses cold-roll Stainless steel.
2. Motor: Germany SEW brake motor (outer), power 0.75KW, power supply 220V.
3. Control system: Imported Japan Mitsubishi converter and PLC to control of electric box (150%1HZ)
4. Opening & closing speed: 0.6-1.5m/s (adjustable).
5. Safety Device: Korea Photocell Sensor, emergency stopping reaction when sensing obstacles.
6. Curtain: France high-density polyester fiber and the surface coating processing, thickness 0.8MM, variety colors can be chose: Red, yellow, blue, green, orange, gray, white, transparent, etc. Tensile strength: 4000/3500N/5cm, tear strength 600/600N. Fire-proofing level: German standard DIN75200 Usage temperature: -30 ° C +70 ° C.
7. Wind resistant: The Aluminium alloy Reinforce Girder to increase wind resistant effect.
8. Curtain replacement function: Aluminium alloy Reinforce Girder is loaded between 2 pieces Curtain, can be replaced easily if any curtain broken, save your cost.
9. Transparent window: 1.2MM thickness transparent PVC window, size and location is up to your request, more safer.
10. Seal: Seal brush are Installed inside the guides, and the special bottom design, to fit any uneven ground.
11. Cotrolling way: Push button + radar sensor, very convenient.
12. Limiting Switch: Mechanical limiting switch, easily and exactly.
13. Emergency STOP: With emergency stop button on control panel, can stop easily by
Hand once disconnect or accident
14 Fault recovery function: All Hongfa's production is with fault recovery function, system will self-recovery after power cut off.
15. Delivery time: About 7 business days with contract and deposit confirmed.
16. Pyament item: 50% before production, and the other 50% before shipment.
17. Warranty Details: We provide 12 months warranty for all doors and accessories (except man-made disasters, Irresistible natural disasters, ect^).
We have many professional engineers with rich experience, qualified products, perfect service system, and good cooperation relationship with many famous companies.
We have the best solution for you, and we provide all the support you need to achieve optimum results, or value, or both, from whatever products you buy.
We provide 12 month warranty for all product and accessories. And custom made door size/color/material.
Screw and Barrel for Plastic Extrusion Line
Model NO.: GW
Raw Material: 38CrMoAl 42cmo
Usage: Pipe Profile Sheet Board
Motor: Simens
Inverter: ABB Brand
Contactor: France Schneider Contactors
Temperature Control: Japan Omron
Trademark: GPM
Transport Package: PE Film Winding Wrapping
Specification: 20-800mm
Origin: Shanghai
HS Code: 8477209000
Model NO.: GW
Raw Material: 38CrMoAl 42cmo
Usage: Pipe Profile Sheet Board
Motor: Simens
Inverter: ABB Brand
Contactor: France Schneider Contactors
Temperature Control: Japan Omron
Trademark: GPM
Transport Package: PE Film Winding Wrapping
Specification: 20-800mm
Origin: Shanghai
HS Code: 8477209000
Common MaterialsÂ