Installation steps for SANY hydraulic cylinder seals
For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany Safe Seal Technology Co., Ltd. , https://www.aprseal.com
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.
Jiesheng Ocean successfully developed large-scale tuna purse seine fishing equipment
Recently, the industry-university research team led by Ningbo Jiesheng Marine Equipment Co., Ltd. successfully developed a large-scale tuna purse seine fishing equipment. The successful development of this equipment has filled the domestic gap, which has changed the situation that China's large-scale tuna purse seine fishing equipment is completely dependent on imports, which has created favorable conditions for the development of offshore fishing in the field of tuna in China.
   This large-scale tuna purse seine fishing equipment was jointly developed by Jiesheng Marine Equipment Co., Ltd. and the Fisheries Machinery and Instrument Research Institute of China Academy of Fishery Sciences and the National Oceanic Fisheries Engineering Technology Research Center through industry-university-research cooperation. After the technical review, the expert group organized by the Fisheries and Vessel Inspection Bureau of the Ministry of Agriculture believes that this equipment has been introduced, digested, absorbed and optimized by key technologies, and coordinated in the fast-distribution control technology of the fence and the high-speed netting of the power block. Innovations have been made in grinding and non-slip, fence nets and system integration controls. The bench test shows that the technical performance parameters of the equipment have reached the technical level of similar international products and have good promotion value.