Installation and commissioning of impact crusher

Installation and commissioning of the impact crusher :

Installation: Select the installation location according to the scope of the machine, and ensure that there is sufficient maintenance space.

debugging:

1. The rotor has been balanced before leaving the factory. Users generally do not need to perform balance test. When replacing the hammer and rotor parts, they should be balanced.

2. The main machine installation should be balanced, the spindle horizontality error is less than 1mm/m, the main driven wheel is in the same plane, the belt is adjusted to be tight and the motor is fixed.

3. Check that the mounting position of each component is moving, deforming, locking all bolts, and check that the seal is good.

4. Check the wiring and fastening of the electrical box, adjust the delay relay and overload protector, turn on the circuit, test the motor steering, and select the fuse of the appropriate specification.

5. Check the hydraulic system for reliable operation and leakage.

6. Remove the foreign matter in the impact crusher and move the rotor by hand to check for friction or collision.

Rubber Hygroscopic Agent Rubber Biocide-algaecide Agent

Actmix®CaO-80, the hygroscopic agent for rubber compounds of all kinds to prevent porosity, particularly suitable for extruded rubber compounds, such as seals in car or building, which is vulcanized in hot air, fluidized bed, salt bath and microwave device.

Actmix®CaO-80GE F200 allows:

Dust free products with a complete filtration up to 45µm, environment improver, health guard of operators.

Lower water absorption and effective guarantee of stability and activity of CaO due to pre-dispersed masterbatch.

Rubber Hygroscopic Agent,Rubber Desiccants Agent,Rubber Super Dry Pack Hygroscopic,Rubber Strong Hygroscopic

Ningbo Actmix Rubber Chemicals Co., Ltd. , https://www.actmixchemicals.com