Explosion-proof emergency light introduction and use common sense
Explosion-proof emergency light can be divided into one type of light and split type light. One kind of light is the type of light source that is used in the normal working condition to be used as the light, while the split light is just the kind of light. Emergency lights used in emergency facilities. This kind of light source is mainly powered by a battery type power supply. When the power supply facility completely stops supplying power, this kind of light source will immediately activate its entire lighting system. To achieve a certain lighting effect. During the installation process, it can also be set to switch mode operation, or it can be set to automatic mode operation.
This type of explosion-proof emergency light mostly uses LED light source body for illumination, so as to save power while prolonging the service life of the light source body, and is highly efficient and energy-saving. Since the overall design concept of this lamp source is used for emergency, the overall circuit design is more reasonable, and the electrical efficiency is higher. It is safe and reliable to use, and it can be exempted from the use of this lamp source in everyday life. Due to regular maintenance, it has become a preferred source of light among many large shopping malls and companies.
Explosion-proof emergency lights should pay attention to some common sense when used:
1. In the process of transportation, the lamps should be installed in the configured carton, and some foam should be filled to reduce the loss of light bulbs caused by the shock.
2. In the installation of explosion-proof emergency lights , the lamps should be installed at the exit or on the emergency track, which can have better results in emergencies.
3. When using this type of lamp, the surface temperature of the lamp will increase, which belongs to some common safety phenomena. However, do not touch the center of the lamp with your hand, because its center temperature is higher than the outside temperature. Many, so as not to be burned.
4. When repairing explosion-proof emergency lights , be sure to cut off the power to prevent accidents.
The performance features of explosion-proof emergency lights are mainly automatic emergency functions, and they have a long emergency time. Don't worry about stopping work without electricity. It adopts a new type of LED light source, so that its power is reduced, its service life is prolonged, and its energy efficiency is high. Its internal structure design is more optimized and reasonable, has a higher electrical efficiency, so as to achieve higher reliability and energy-saving, in addition, this explosion-proof emergency light in the appearance of a relatively lightweight alloy shell, waterproof resistance Impact, avoiding some insecure factors. Its surface has been made using recent methods. It has strong corrosion resistance, and even if it works in very bad weather, it will not cause sudden changes.
Laser Power Meter
Laser power meter is used to measure laser power and power stability. CNI as a world's leading designer and manufacturer of laser system, designed several laser power measurement instruments with the features of accuracy testing, easy operation, etc., which could fully meet customer's practical needs of laser power and power stability measurement. They are widely used in the research, teaching, medical science, industry and other fields.
The power can not go beyond the range of the power meter when using it.
â– Testing Instrument: Power Meter
|
Product
|
Picture
|
Model
|
Power range
|
Main Features
|
|
Thermopile
Laser Power Meter
|
TS series
(wide range)
|
|
TS2+TP100
|
2mW-2W
|
1.Wavelength range: 0.19 -20µm
2. Damage threshold: 15kW/cm2
3. Power measurement range:2mW-15W
4. Sensitivity diameter: 14mm
5. Minimum measuring precision:0.1mW
6. SMA905/ FC fiber switch connector (Optional)
|
|
TS5+TP100
|
5mW-5W
|
|
TS15+TP100
|
10mW-15W
|
|
TS35+TP100
|
10mW-35W
|
1. Wavelength range: 0.19 -25µm
2. Damage threshold: 40kW/cm2
3. Power measurement range: 10mW-50W
4. Sensitivity diameter: 22mm
5. Minimum measuring precision: 0.001W
6. SMA905/ FC fiber switch connector (Optional)
|
|
TS50+TP100
|
10mW-50W
|
|
TS100+TP100
|
0.5W-100W
|
. Wavelength range: 0.19 -20µm
2. Damage threshold: 45kW/cm2
3. Power measurement range: 0.5W-100W
4. Sensitivity diameter: 25mm
5. Minimum measuring precision: 0.001W
|
|
HS series
(High Precision)
|
|
HS1+TP100
|
100µW-1W
|
1. Wavelength range: 0.19 -15µm
2. Damage threshold: 1.5kW/cm2
3. Power measurement range: 100µW-5W
4. Sensitivity diameter: 8.5mm
5. Minimum measuring precision: 0.01mW
6. SMA905/ FC fiber switch connector (Optional)
|
|
HS5+TP100
|
500µW-5W
|
|
USB series
(Multi-channel)
|
|
TS2/TS5/TS15-USB
TS35/TS50-USB
TS100-USB
HS1/HS5-USB
|
100µW-100W
|
1. Wavelength range:0.19 -25µm
2.Power measurement range: 100µW-100W
3.Single channel/multiple channel power measurement
4.PC upper computer software display measurement
|
|
Photoelectric
Laser Power meter
|
PS100 series
(High precision)
|
|
PS100
|
2nW-100mW
|
1. Wavelength range: 320-1100nm
2. High precision: ±2%
3. Resolution: 2nW
4. Minimum measuring precision: 0.001nW
|
â– Examples of Testing Results
|
|
High precision photoelectric power meter testing result
|
Termopile power meter testing result
|
Laser Power Meter,Handheld Laser Power Meter,Laser Energy Meter,High Power Laser powermeter
Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.opticsqm.com
