Floating Pneumatic Fender Manufacture with BV/Kr/Lr/Gl/ABS/Dnv Certification sling type defense type chain-net type  Pneumatic Rubber Fender  (1) High energy absorption The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Aohai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.  (2) Ultra low back pressure The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.  (3) Inclined contact, good adaptability Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of sea inflatable fender, its adaptability is much higher than other fender.  (4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.  (5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.  About Us Aohai Marine Fittings Co., Ltd belong to Aoahai Group, is invested by Aohai Anchor Chain Factory, total investment is over $180 million. We supply products for Offshore Project, Quay Construction and Shipbuilding Industry. We currently have more than 600 stuff, including 75 engineers and management, 25 international trade personal, 19 QA engineers. Our main production equipment include 5# , 7#, 9#, 11# chain manufacturing machine, automation anchor manufacturing machine, steel mooring buoy manufacturing production line, 3 sets of rubber fender production line, heat treatment machine, load test machine and shot blasting machine.  Meanwhile, we are sales representative of other big factories, products mainly include Pneumatic Rubber Fenders, Marine Mooring Ropes, Deck Out-fittings and Steel Wire Ropes. We are ISO9001 Quality Control System approval, and approved by ABS, BV, LR, DNV, GL, NK, KR, CCS, RINA and other IACS class societies.   Any inquiry please contact: Kelly Mobile: +86-17753210369      Website: www. anchorchaincn.com / www.aohaimarine.com
KC/KWB series Industrial Chiller is mainly applied in Plastic & Rubber industry; it can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency. They are also widely used in Metal working, Mechanical & Engineering, Chemical & Pharmaceutical, Food & Beverage, Laser, Electronics industry, Textile, Electroplate, Semi-conductor testing, Water jet, Vacuum coating, Construction and Military.
Design features
¨ Adopted world famous brand compressors and high efficiency condenser and evaporator, ensure high cooling efficiency, low energy consumption, low noise and long service life.
¨ Chilled water temperature range 5℃ to 35℃.
¨ R22 charged, CFC free type R407C, R410A, R404A, R134A for option, high cooling efficiency.
¨ Over sized evaporator and condenser ensure the chiller unit running under 45C high ambient temperature.
¨ Microcomputer control system offering accurate temperature stability within ±1℃.
¨ Low noise and big volume air blower.
¨ Standard equipped Iron pump, stainless steel or high lift pump for option.
¨ Multi-protection devices ensure the chiller unit running safely.
¨ The innovative evaporator-in-tank configuration ensures a steady water temperature offered, as the evaporator also cools the tank itself, reduces ambient heat gain, and increases the efficiency.
¨ KWB Water Cooled Industrial Chiller adopted shell and tube condenser, features speed heat dissipation and high cooling efficiency, it is good to be used in High ambient temperature area with abundant water.
¨ KC Air Cooled Industrial Chiller adopted aluminum fin/copper tube type condenser, easy for cleaning and installation.
¨ Power supply: 1PH 220V/50HZ-----1/2HP to 2HP
3PH 380V/415V 50HZ-----3HP to 60HP
Water Cooled Refrigerating System Industrial Water Cooler,Water Cooled Refrigerating System,Cryogenic Refrigeration Unit,Water Cooler Type Chiller Shenzhen city KayDeli Refrigeration Equipment Co.,Ltd. , https://www.kaydelichiller.com
Name:
Pneumatic Rubber Fender
Standard
ISO 17357
Inner pressure
 50KPA 80KPA other can be supplied as required
Type
Certification
IACS KR LR BV NK ABS DNV CCS...
Function
ship to ship
Surface
Black painted or as required
Material
Natural Rubber
Diameter
0.5~4.5M
Length
1.0M~9.0M
 
Â
Floating Pneumatic Fender Manufacture with BV/Kr/Lr/Gl/ABS/Dnv Certification
Model NO.: pneumatic fender
Length: From1m to 12m
Part: Pressure Guage and Spanner
Certification: BV, Ce, ISO9001, SGS, Ukas, CCS
Technology: Anti-Explosion Anti-Aging
Type1: 50kpa Pneumatic Fender
Type2: 80kpa Pneumatic Fender
Type3: Chain-Net Pneumatic Fender
Trademark: AOHAI RMS WHALE
Transport Package: According to Customer Request
Specification: see attached
Origin: China
HS Code: 40169400
Â