As the quality of seal disc in the sealing devices will influence the sealing performance and the service life-time directly, and the physical properties of seal disc will be decided by the composition and microstructures of the raw material, so choosing an ideal raw material is a critical thing for making the seal disc. Alumina Ceramic Seal Disc,Industrial Alumina Ceramic Seal Disc,Electrothermal Alumina Ceramic Seal Disc,Microporous Alumina Ceramic Seal Disc Jinghui Industry Ltd. , https://www.industrialcerams.com
One machine can produce two kinds of profiles
828-207-28 roof panel  or one more wave length wider 828+207=1035mm Â
1035-207-28 roof panel.
1035-207-28 roof making machine can produce both 828-207-28 and
1035-207-28 roof sheetÂ
Ps:We are factory,we know better what kind of machine buyers need and we are good at designing totally as buyers' panel or samples.
Quick Look
Â
1
Direct Roof Forming Machine Factory/Manufactuer
2
CE authentication book
3
PLC Automatic Production Line
4
Many profile design available
Â
Main Parameters
Â
1
Feeding Width
1000mm or Panel Drawing as custome design
2
Material Thickness
0.3-0.8mm
3
Cutting Blade
Cr12 Mould Steel with heat treatment
4
Forming Steps
9-15 roller steps accroding to the tile drawing
5
Roll Material
Hard Forged 45# steel, Quenching and tempering
6
Motor Power
5.5 KW
7
Pump Station
4 KW
8
Speed
8-12m/min Electric Motor Drive
Â
Â
10-15m/min Hydraulic Motor Drive
9
Size
6800*1450*1500mm
10
Weight
about 3.5 tons
11
Control Systerm
PLC Computer Controller
12
Diameter of shaft
75mm,45# steel,Hard Forged
 Ps:All parameters above are changeable.We shall design the machine according to your requirement.
6.One Forming Machine Line
Â
1
5 Ton Manual Uncoiler
1 Set
2
Collection Tables
3 Sets
3
Quick-Wear Parts
1 Set
Â
Technical parameters:Â
Â
Â
Items
Specification
Steel Coil
Steel Coil Thickness
0.3-1mm
Coil Width
up to 1250mm
Gross weight of the coil
Up to 5000 Kg
Forming System
Main Motor Power
5.5 kw /Â 7.5Kw
Hydraulic Station Power
3kw
Sprocket
P-25.4
Forming Station
16/20
Material of Rollers
C45 steel hard chrome plate
Length of Production Line
11m
Diameter of Principal Axis
80mm
Material of Blade
Cr12
Length of Tolerance
± 2mm
Tile Width
up to 1100mm
Coil Width
up to 1250mm
Processing Speed
2-4m/min
Gross Weight
5800 Kg
Installation Dimension (L*W*H)
11m*1.6m*1.5m
Cutting System
Material of Cutting Blade
Cr12Mov
Cutting Length
Automatic Measuring Device
Tolerance of the cutting
± 2mm
Electrical Control System
Way of Control
PLC Control (Siemens)
Inverter
Fuji, Mitsubishi, Delta
Low voltage electric device
Schneider
After-sales service
Technical Support
Fully providing technology supports both within and after the warranty period. Feed back to our customers at the first time.
Spare Parts
Promptly providing spare parts and wearing parts.
Upgrade
Improve technology and upgrade of equipments.
Other service
Raw Materials
Supply of raw materials made in China with good quality, quick delivery and reasonable price
FAQ
1)Q: What is the Warranty Machine ?Â
A:  For our roll forming machine , we have 1 year warranty. If any quality problems in this period ,we will take on the shipping cost and replacement.
2)Q: Do you have after sales support?
A: Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
3) Q: How do your machines compare with other big companies in this market?
A: We are up to date with the latest technology and improve our machines accordingly
4)Q: How does your factory do regarding quality control?Â
A: Quality is priority. We always attach great importance to quality control from the very
beginning to the end of the production.  Every product will be fully assembled and carefully tested before it's packed for shipment.
5) Q: Do you sell only standard machines?
A: No, most of our machines are built according to customers specifications, using top brand name components.
6) Q: Will you deliver the right goods as ordered? How can IÂ trust you?
A: Yes, we will. The core of our company culture is honesty and credit. We are ALIBABA's gold
supplier with BV assessment. If you check with ALIBABA, you will see that we have never got any complaint from our customers.
  Â
Please contact us :
Â
Â
Â
Â
Â
Â
Â
One machine can produce two kinds of profiles
828-207-28 roof panel  or one more wave length wider 828+207=1035mm Â
1035-207-28 roof panel.
1035-207-28 roof making machine can produce both 828-207-28 and
1035-207-28 roof sheetÂ
Ps:We are factory,we know better what kind of machine buyers need and we are good at designing totally as buyers' panel or samples.
Quick Look
Â
1
Direct Roof Forming Machine Factory/Manufactuer
2
CE authentication book
3
PLC Automatic Production Line
4
Many profile design available
Â
Main Parameters
Â
1
Feeding Width
1000mm or Panel Drawing as custome design
2
Material Thickness
0.3-0.8mm
3
Cutting Blade
Cr12 Mould Steel with heat treatment
4
Forming Steps
9-15 roller steps accroding to the tile drawing
5
Roll Material
Hard Forged 45# steel, Quenching and tempering
6
Motor Power
5.5 KW
7
Pump Station
4 KW
8
Speed
8-12m/min Electric Motor Drive
Â
Â
10-15m/min Hydraulic Motor Drive
9
Size
6800*1450*1500mm
10
Weight
about 3.5 tons
11
Control Systerm
PLC Computer Controller
12
Diameter of shaft
75mm,45# steel,Hard Forged
 Ps:All parameters above are changeable.We shall design the machine according to your requirement.
6.One Forming Machine Line
Â
1
5 Ton Manual Uncoiler
1 Set
2
Collection Tables
3 Sets
3
Quick-Wear Parts
1 Set
Â
Technical parameters:Â
Â
Â
Items
Specification
Steel Coil
Steel Coil Thickness
0.3-1mm
Coil Width
up to 1250mm
Gross weight of the coil
Up to 5000 Kg
Forming System
Main Motor Power
5.5 kw /Â 7.5Kw
Hydraulic Station Power
3kw
Sprocket
P-25.4
Forming Station
16/20
Material of Rollers
C45 steel hard chrome plate
Length of Production Line
11m
Diameter of Principal Axis
80mm
Material of Blade
Cr12
Length of Tolerance
± 2mm
Tile Width
up to 1100mm
Coil Width
up to 1250mm
Processing Speed
2-4m/min
Gross Weight
5800 Kg
Installation Dimension (L*W*H)
11m*1.6m*1.5m
Cutting System
Material of Cutting Blade
Cr12Mov
Cutting Length
Automatic Measuring Device
Tolerance of the cutting
± 2mm
Electrical Control System
Way of Control
PLC Control (Siemens)
Inverter
Fuji, Mitsubishi, Delta
Low voltage electric device
Schneider
After-sales service
Technical Support
Fully providing technology supports both within and after the warranty period. Feed back to our customers at the first time.
Spare Parts
Promptly providing spare parts and wearing parts.
Upgrade
Improve technology and upgrade of equipments.
Other service
Raw Materials
Supply of raw materials made in China with good quality, quick delivery and reasonable price
FAQ
1)Q: What is the Warranty Machine ?Â
A:  For our roll forming machine , we have 1 year warranty. If any quality problems in this period ,we will take on the shipping cost and replacement.
2)Q: Do you have after sales support?
A: Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
3) Q: How do your machines compare with other big companies in this market?
A: We are up to date with the latest technology and improve our machines accordingly
4)Q: How does your factory do regarding quality control?Â
A: Quality is priority. We always attach great importance to quality control from the very
beginning to the end of the production.  Every product will be fully assembled and carefully tested before it's packed for shipment.
5) Q: Do you sell only standard machines?
A: No, most of our machines are built according to customers specifications, using top brand name components.
6) Q: Will you deliver the right goods as ordered? How can IÂ trust you?
A: Yes, we will. The core of our company culture is honesty and credit. We are ALIBABA's gold
supplier with BV assessment. If you check with ALIBABA, you will see that we have never got any complaint from our customers.
  Â
Please contact us :
Â
Â
Â
Â
Â
Â
Â
With the development of technology, technical ceramics have to be thought as a desired material for seal disc due to their exceptional wear resistance, self-lubrication, chemical stability, high-temperature resistance features. In common case, the ceramic seal disc are commonly made from alumina ceramic, zirconia ceramic and silicon carbide, they are regularly formed by dry pressed, hot pressed and isostatic pressed with very dense ceramic body. In order to enhance the sealing performance, the polishing finish at working surface and double-side grinding will be carried after sintering, afterwards, the mirror surface will be formed which will reduce the friction under working.
We have been supplying hundreds of ceramic seal disc for domestic and overseas client, including a series of standard designs and a variety of customized ones. With our seasoned know-how and experience to the industry, we deeply understand how to control the critical dimensions, how to keep the quality consistence.
These ceramic seal disc are mainly used in faucet valve, water diverter, water pump, oil pump and gas pump as a key component inside the sealing system.
Endurable 1100 Arc Bias Glazed Tile Forming Machine
Model NO.: Tile Forming Machine
Name: Glazed Tile Roofing Sheet Roll Forming Machine for
Power of Main Motor: 5.5kw
Material of Cutter: #45
Color: Customized
Trademark: Durmapress
Transport Package: Naked and Fasten in The Container
Specification: 6500*1300*1500mm
Origin: China Mainland
HS Code: 84552210
Model NO.: Tile Forming Machine
Name: Glazed Tile Roofing Sheet Roll Forming Machine for
Power of Main Motor: 5.5kw
Material of Cutter: #45
Color: Customized
Trademark: Durmapress
Transport Package: Naked and Fasten in The Container
Specification: 6500*1300*1500mm
Origin: China Mainland
HS Code: 84552210