330mm Yg10X 10mm 12mm 14mm Diameter Cemented Carbide Rod It is suitable for the production of various types electrical machine & electronic progressive dies and punches. And widely used in ceramics, printing machine, plastic, rubber, leather industry and cutting machines, CNC machine, CNC, PCB micro drill bits, etc. Details of Tungsten Solid Carbide Rods Grade Physical performance Application Non-standard or Tolerance  1)Solid tungsten carbide rod/bar/stick Diameter(D) Tolerance Standard length Φ0.5~5.5 +0.30~+0.45 330 (+5.0/0) Φ6.0~40.0 +0.20~+0.60 330(+5.0/0)  2)Hollow tungsten carbide rod/bar/stick Outer Diameter Tolerance of Outer Diameter Diameter of Hole Tolerance of Hole Standard Length Φ2.5~8.0 +0.2~+0.5 0.3~1.5 +/-0.15 330 (+5.0/0) Φ10.0~30.0 +0.3~+0.8 2.0~5.0 +/-0.30 330 (+5.0/0)  Dimensions of Tungsten Carbide Rods Dimensions of Tungsten Carbide Rods Dimensions Dimensions Type Tolerance of diameter(mm) Tolerance of length(mm) Type Tolerance of diameter(mm) Tolerance of length(mm) Φ3.0×320 ±0.5/0.6 0/+5.0 φ8.0×45 Φ3.5×320 0/+5.0 φ8.0×50 Φ4.0×320 0/+5.0 Φ8.0×320 φ4.5×320 0/+5.0 φ8.6×320 φ4.0×150 0/+5.0 φ8.0×150 φ5.0×36 0/+5.0 Φ9.0×320 φ5.0×80 0/+5.0 φ10.6×320 φ5.0×40 φ10.0×65 φ10.0×60 Φ5.0×320 φ10.0×55 Φ5.5×320 φ12.0×78 Φ6.0×100 φ12.0×150 φ12.0×130 Φ6.6×320 φ12.6×320 Φ7.0×320 φ15.6×320 φ7.0×60 φ16.0×100 φ7.6×320 φ16.6×320 φ8.0×80 φ18.6×320 φ8.0×40 φ25.0×320  Tungsten Carbide Grade Information Grade Density g/cm3 Hardness HRA(hv) T.R.S(M Pa) Performances &applications recommended YG6 14.9 89.5 Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. YG8 Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. YG11 Medium grain, for wear parts and mining tools YG15 Medium grain, for mining tools, cold heading and punching dies YS2T Fine carbide,high wear resistance,high bending strength,high resistance to bonding, high thermal strength.Machining of refractory alloys, stainless steel and high manganese steel etc.Mainly used for disc cutter and other tools YL10.2 Wear resistance and strength comparatively higher,suitable for processing cast iron, non-ferrous metal and non-metalloid materials. YNi8 This grade with 8% nickel binder, it has good wear resistance& corrosion resistance performance ,especially used for high pressure environmental , also good for cutting the titanium alloy.  Grade ISO Grade g/cm3 Density g/cm3 Hardness HRA> T.R.S>N/mm² TRS > Performances or recommended applications. Conventional grades YG3 Medium grain, for finishing machining of cast iron and non-ferrous metals. YG3X Fine grain, for finishing machining of cast iron and non-ferrous metals. YG4C Coarse grain, for percussion drill bits and mining inserts. YG6 Medium grain, for rough machining of non-ferrous metals. YG6A Fine grain, for drawing dies and woodworking tools. YG6X Fine grain, for cutting of non-ferrous metals. YL10.1 K12-K25 M10-M30 with good wear-resistance and good impact- resistance,Suitable for general drill tool wear parts. YG8 Medium grain, for drawing dies. YG8A Medium grain, for the drawing dies and wood-working. YG8X Fine grain, high hardness and oxidation resistance at high temperatures and good impact toughness. YG8C Coarse grain, for button drill bits and the mining inserts. YG10 Medium grain, for machining gray cast iron with a low hardness. YG11 Medium grain, for wear parts and mining tools. YG11C Coarse grain, for mining inserts. YGL10.2 M25-M40 K25-K35 It is suitable for machining common steel,cast iron,stainless steel,nickel based alloys and titanium alloys,etc.It is recommended for making conventional tools,such as twist drill,end mills,screw taps,gun drill,ect. Medium grain, for mining tools, cold heading and punching dies. YG20 Medium grain, for non-standard dies and moulds, cold heading and punching dies. YG20C Coarse grain, for die and moulds making screws. YG22 Medium grain, for non-standard dies and moulds, cold heading and punching dies. High-performance grade YD40 High impact resistance, for cold heading and punching dies and hot heading and punching dies. YD45 High impact resistance, a special grade for hot heading dies. YD05 Used for glass cutting YD15 Used in the manufacture of heavy duty cutting tool for castings and forgings and all kinds of steel skin coarse car or get a good effect, is widely applied in cutting blade. YD201 YC45 Used in the manufacture of heavy duty cutting tool for castings and forgings and all kinds of steel skin epidermislathe or have a good effect. YS series grades YS2T It is belong with ultrafine grain alloy  , suitable for low-speed roughturning, milling, heat-resistant alloy and titanium alloy for the cutters and tap, saw blade milling cutter is best . YS4 Suitable for iron-based, nickel-based high-temperature alloy, rough machining of high strength steel, is also suitable for cold hard cast iron, heat-resistant stainless steel, high manganese steel, rough machining of hardened steel. YS8 YS10 Suitable for high nickel iron, ball mill infinite chilled cast iron and white iron rough and finish machining, also used in rough machining and finish machining of cast iron. YS25 Suitable for carbon steel, cast steel, high manganese steel, high strength steel and alloy steel rough turning, milling and planing. YS30 Alloy ultra fine particles, suitable for large feeding high efficiency milling all kinds of steel, especially the alloy steel milling. YS5 It is belong ultra fine grain alloy, suitable for high speed car, milling, heat-resistant alloy and titanium alloy for the cutters and tap, saw blade milling cutter is best Cutting steel class grade YT5 Suitable for heavy duty cutting of steel and cast steel and for a low-speed and medium-speed and a big feed-rate roughing operation under unfavorable machining conditions. YT14 Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate. YT15 Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended. YC40 Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate and for face milling as well. YW1 Suitable for semi-finishing and finishing of stainless and ordinary alloyed steel. YW2 Suitable for semi-finishing and finishing of stainless and low alloyed steel, mainly used for machining of trains' wheel hubs. YW3 It is suitable for semi-finishing and finishing of stainless and ordinary alloyed steel.  Company Introduction   About Lihua Cemented Carbide Factory  Established in 1990, specialized in production carbide products more than 20 years and located in Zhuzhou city which is the hometown of tungsten carbide in China. Main Products Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter woodworking tool, V-cutter, Shoes cutter ects.  Any kinds of customized carbide products can be made. Monthly Capacity of 15 Tons Strictly QC We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output. Shipping Below shows the estimate delivery time for different courier:   Contact: Foreign Sales Manager: Coco 330mm Yg10X 10mm 12mm 14mm Diameter Cemented Carbide Rod It is suitable for the production of various types electrical machine & electronic progressive dies and punches. And widely used in ceramics, printing machine, plastic, rubber, leather industry and cutting machines, CNC machine, CNC, PCB micro drill bits, etc. Details of Tungsten Solid Carbide Rods Grade Physical performance Application Non-standard or Tolerance  1)Solid tungsten carbide rod/bar/stick Diameter(D) Tolerance Standard length Φ0.5~5.5 +0.30~+0.45 330 (+5.0/0) Φ6.0~40.0 +0.20~+0.60 330(+5.0/0)  2)Hollow tungsten carbide rod/bar/stick Outer Diameter Tolerance of Outer Diameter Diameter of Hole Tolerance of Hole Standard Length Φ2.5~8.0 +0.2~+0.5 0.3~1.5 +/-0.15 330 (+5.0/0) Φ10.0~30.0 +0.3~+0.8 2.0~5.0 +/-0.30 330 (+5.0/0)  Dimensions of Tungsten Carbide Rods Dimensions of Tungsten Carbide Rods Dimensions Dimensions Type Tolerance of diameter(mm) Tolerance of length(mm) Type Tolerance of diameter(mm) Tolerance of length(mm) Φ3.0×320 ±0.5/0.6 0/+5.0
Pallet Decoiler is the horizontal type Decoiler Machine which it`s the most simple and easy to unload the coils.
Pallet Decoiler is specialized for the soft narrow material uncoiling. It can stock a few coils which the width is less than 150mm and the thickness less than 1.0mm, the total weight less than 2000kgs at one time, it`s usually working with the High Speed Press Machine and high speed feeder machine for making the terminal stamping, metal button stamping, eyelet stamping and small electric parts.
And the feeding speed can reach 24m/min, and the special advantage is suitable for all kinds of the inner diameter.
Pallet Decoiler Pallet Decoiler,Flat Uncoiler Pallet Decoiler,Flat Strip Pallet Decoiler,Industries Pallet Decoiler,Decoiling Machine,Machine Decoiler Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com
 Applications:
Product name
Solid carbide Rod /Â Bar /Â Stick
OD tolerance
0.5um
Surface fineness
Ra0.025a
Sizes
Diamter:Φ0.5-Φ0.35mm,Length:100-330mm(diameter is Φ1.0-Φ6.0mm,lenght can up 700mm)
Type
Round(solid,hollow)
YL10.2, K20,K30 ,YL50,YU06A,YU06R,YF06,YH6F,YG11 etc.
Material
100% Tungsten Raw Materials
High Precision , hardness,strength, wear resistance .
For production various types electrical machine &Â electronic progressive dies and punches.And ceramics, printing machine, plastic, rubber, leather industry and cutting machines.
Can be customized
Â
±0.5/0.6
0/+5.00
±0.5/0.6
±0.5/0.6
0/+5.0
±0.5/0.6
±0.5/0.6
0/+5.0
±0.5/0.6
±0.5/0.6
0/+5.0
±0.5/0.6
±0.5/0.6
0/+5.0
±0.5/0.6
±0.5/0.6
0/+5.0
±0.5/0.6
±0.5/0.6
0/+5.0Â
±0.5/0.6
0/+5.0
±0.5/0.6Â
0/+5.0Â
φ5.0×100
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
Φ6.0×320
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6Â
0/+5.0Â
±0.5/0.6
0/+5.0Â
±0.5/0.6
0/+5.0Â
2150
14.6
89
2320
14.4
87.5
2260
14.1
86.5
2400
14.45
92.5
2800
14.5
92.5
3400
14.6
88.5
1710
K05
15.20-15.40
91.5
1400
K05
15.20-15.40
92.0
1300
Â
15.05-15.25
90
1620
K20
14.85-15.05
90.5
1860
K10
14.85-15.05
92.0
1600
K10
14.85-15.0
91.7
1800
14.9
91.5
1900
K30
14.60-14.85
89.7
2060
K30
14.6-14.85Â
90.0Â
2000Â
K30
14.60-14.85Â
90.5Â
2000Â
Â
14.55-14.75Â
88.0Â
2160Â
 K40
14.25-14.55Â
88.0Â
2160Â
K40Â
14.30-14.50Â
87.5Â
2260Â
Â
14.20-14.40Â
87Â
2260Â
 14.5
91.5Â
2200Â
 YG15
Â
 13.95-14.15
86.5Â
2400Â
Â
 13.45-13.65
84.0Â
2480Â
Â
 13.40-13.60
82.5Â
2480Â
Â
13.15-13.55
83.0
2480
Â
 13.10-13.55
82.5Â
2480Â
Â
 13.25-13.65
83.0Â
2480Â
Â
14.90-15.20
93Â
Â
Â
 14.80-15.10
91Â
1900Â
K05
14.65-14.95
93.0Â
1760Â
P40,P45
12.60-12.90
90
2026Â
 K30
14.40-14.60
 91.5
2200Â
Â
13.40-14.40Â
91.5Â
2260Â
M05,K10
13.9Â
92.5
1720Â
M05,K10
14.30-14.50Â
91.5Â
2650Â
P20,P40
12.80-13.20Â
91.0Â
2000Â
P25,P30
12.45Â
91Â
1800Â
Â
13.95-14.25Â
92Â
2000Â
 P30
11.50-13.20
90.0Â
1750Â
P20
11.20-11.80
91.0Â
1550Â
 P10
11.10-11.60Â
91.5Â
1500Â
P40
13.00-13.40Â
89.5Â
1860Â
M10
12.85-13.40Â
92.0Â
1380Â
 M20
12.65-13.35Â
91.0Â
1680
M10
12.85-13.10Â
92.0Â
1420
Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc.Â
 
 
Â
We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity has up to 15 Tons per month. Customized is welcome, customized sample can be ready in 3-5 days and 1Â day can deliver for stocks.
 
We normally will dispatch your order within 2-10 working days depends on stock level, as soon as the order is shipped, we will list the tracking number on your order detail page, if there is any problem regarding to the shipping, please feel free to contact us.Â
TNT: 10-14 working daysÂ
DHL: 7-10 working daysÂ
FedEx: 8Â to 10 working daysÂ
UPS: 7Â to 10 working daysÂ
EMS: 10-14 working day
Mobile:Â +86 13973352165Â (available 24 hours.)
Website:Â http://en.lihuacarbide.com/
Factory Address: Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China Applications:
Product name
Solid carbide Rod /Â Bar /Â Stick
OD tolerance
0.5um
Surface fineness
Ra0.025a
Sizes
Diamter:Φ0.5-Φ0.35mm,Length:100-330mm(diameter is Φ1.0-Φ6.0mm,lenght can up 700mm)
Type
Round(solid,hollow)
YL10.2, K20,K30 ,YL50,YU06A,YU06R,YF06,YH6F,YG11 etc.
Material
100% Tungsten Raw Materials
High Precision , hardness,strength, wear resistance .
For production various types electrical machine &Â electronic progressive dies and punches.And ceramics, printing machine, plastic, rubber, leather industry and cutting machines.
Can be customized
Â
330mm Yg10X 10mm 12mm 14mm Diameter Cemented Carbide Rod
Model NO.: oem
Name: Tungsten Round Rods
Grade: Ys2t/UF6a/Yg8/K10/K20/K30
Density: 14.0~15.2g/cm3
Hardness: 87.5~91.7hra
Trs: 1800~2850n/mm
Cer: ISO9001 2008 SGS
Performance: Excellent Wear Resistance
Business Type: Manufacturer
Advantage: Over 20 Years Experience in This Line
Trademark: LIHUA
Transport Package: Standard or Customized
Specification: ISO9001 SGS
Origin: Zhuzhou, China (Mainland)
Model NO.: oem
Name: Tungsten Round Rods
Grade: Ys2t/UF6a/Yg8/K10/K20/K30
Density: 14.0~15.2g/cm3
Hardness: 87.5~91.7hra
Trs: 1800~2850n/mm
Cer: ISO9001 2008 SGS
Performance: Excellent Wear Resistance
Business Type: Manufacturer
Advantage: Over 20 Years Experience in This Line
Trademark: LIHUA
Transport Package: Standard or Customized
Specification: ISO9001 SGS
Origin: Zhuzhou, China (Mainland)
Â
Â
Â
Â
Â
Â
Â
Ultra-fine grain, for finishing machining of non-ferrous metals and for wood-working tools.
 Suitable for high, stainless steel, high manganese steel and high temperature alloy, silicon steel sheet, and cutting all kinds of coating materials, also suitable for high hardness cast iron and glass and so on work pieces of rough machining, finish machining.
Â
Â
Â
Â
PaymentÂ
Â
Less than or equal to $1000:Â Â 100% advance via Paypal ,or Western UnionÂ
Over $1000 : 30% T/T advance , Balance before shipment .