The rainy weather in recent days in the Zhejiang area did not block the construction enthusiasm of Jurong's new 4,000-ton-per-year fluorocarbon refrigerant project. Zhou Yongqing, Assistant Minister of Production of Juhua Group, told reporters that Juhua invested more than RMB 3 billion in fluoropolymers, caprolactam, and equipment manufacturing, etc., in an orderly manner, including large-scale technical transformation projects such as ammonium sulfate and calcium chloride. Equipment installation is nearing completion and it is expected to be put into production in the first half of the year. To increase investment in the construction of “four new†industrial projects for new materials, new energy sources, new environmental protection, and new uses, so as to realize the transition from basic chemical industry to material chemical industry as soon as possible. According to the “Twelfth Five-Year Plan for Development of Zhejiang Petroleum and Chemical Industryâ€, during the “Twelfth Five-Year Plan†period, the output value rate of new materials and special fine chemicals in Zhejiang Province should reach over 50%, and the rate of production of new products should exceed 25%. , continue to maintain the country's leading position. The China Chemical New Material (Jiaxing) Park is currently the only national chemical new material park in China. At present, the 80,000-ton/year PTA project equipment installation of Jiaxing Petrochemical is nearing completion and will enter the commissioning stage. It is expected that trial production will begin in the first half of the year. In 2013, the annual output value of Jiaxing Petrochemical Co., Ltd. will exceed 10 billion yuan. In addition, the preliminary preparations for five major projects with investment amounts exceeding RMB 1 billion, including the 1.2 million tpa IPTA project and the 72,000 tonne halogenated butyl rubber project of Jiaxing Petrochemical , are proceeding in an orderly manner and will be started one after another during the year. It is reported that the total investment of these large projects exceeds RMB 7.5 billion. After the project is completed, it will generate industrial output value of more than RMB 20 billion. The construction of the project in Formosa Plastics Industrial Park in Ningbo has lifted again. The 150,000-ton/year ABS expansion project of Taiwan Chemical Plastics (Ningbo) Co., Ltd. is implementing equipment installation. It is expected that it will be put into production in July. 1200-24 Mat Tire,Inner Tube Tire,Inner Tube and Mat Tire Great Intl Holdings Limited , http://www.qdatvwheel.com