Xigong Chusheng Tanker: Tanker Brake Failure Solution Due to the special nature of the tanker's transportation materials, special attention must be paid to safety during transportation. Fuel tankers are prone to fire caused by static electricity when they carry oil. Another point is also very dangerous: the brake on the tanker fails. So how can the tanker brake failure in the middle of driving or downhill? Whether it is a tanker or a general truck that has brake failure during driving, it is very dangerous. In the event of a brake failure, we must first maintain a calm mind, and do not panic, and then take appropriate measures according to the actual situation. When the tanker brakes cannot be used normally during driving on a flat road, oil supply to the engine should be stopped immediately, and at the same time when the direction of the tanker is controlled, the speed can be reduced at the fastest speed, and the high speed gear can be used. Into the middle gear, immediately grab the low gear, and then use the speed of the tank car engine to reduce the speed. Use the handbrake to stop the vehicle while changing gears. If you can, do not pull the handbrake one time. This will damage several pieces. If a brake failure occurs on the way downhill, the vehicle inertia must be increased, so be careful when handling it. First, reduce the gear as much as possible, and turn on the headlights and emergency lights to warn other vehicles of attention and avoidance. The vehicle is stopped by the above method until the tanker travels to a flat road section. Do not blindly remove and turn off the flames, but also respond in a timely manner, skillfully use the roadside natural obstacles to stop the accident and reduce accidents and losses as much as possible. The tanker itself has a certain degree of danger, so I hope everyone can read and study the above operation methods carefully to avoid accidents. Wire Mesh,Steel Mesh,Wire Net,Stainless Mesh Anping Xinghong Metal Wire Mesh Co.,Ltd , https://www.xinghongmetal.com