Single Containment LNG Storage Tank
A single containment LNG tank
design is defined as a tank comprising an inner tank and an outer container
designed and constructed so that only the inner tank is required to meet the
low temperature ductility requirements for the storage of the product. The
outer container of a single containment storage tank is primarily for the
retention and the protection of the insulation and to constrain the vapour
purge gas pressure, but is not designed to contain the refrigerated liquid in
the event of a leakage from the inner tank, i.e. it will collapse due to
brittle fracture when getting in contact with large quantities of cryogenic
liquid leaking from the inner tank. Therefore a single containment LNG tank
needs to be surrounded by a bund wall or dike in order to prevent uncontrolled
liquid spillage. It is also referred to as a double integrity LNG container
since the bund wall is considered a second barrier.
Doer's single containment
storage tanks have a capacity of 200-50,000 m3 and pressure of 10-50 kPa.
Single Containment Lng Storage Tank,Single Containment Liquid Natural Gas Tank,Liquid Natural Gas Storage Tank,Liquid Natural Gas Tank For Sale Atmospheric Flat Bottom Storage Tank, VPSA Oxygen Plant, Microbulk Storage Tank , https://www.doercryo.com
Single Stage Oil Sand Handling Submersible Sand Pump
Product Introduction:
The MV/MVR heavy duty sump pump is designed for applications requiring greater reliability and durability. The bearing assembly allows the pump to operate in the "snore" condition without damage to the bearings. It is designed for handling abrasive slurries and corrosive fluids
By using either elastomer or alloy lined wet ends components. The pump is suitable for mining, chemical treatment, waste water treatment, gravel and general process application.
Product Features:
- Fully elastomer lined or hard metal fitted
- Double suction semi-open impeller
- No submerged bearing or packing
- Optional recessed impeller and suction agitator available
- MVR models feature full rubber covering for corrosion resistance
- Can be run in insufficient suction duties
Application Range:
Size: 40 to 250mm
Capacity: 17 to 1000 m3/h
Maximum head: 40m
Pump TypePump Model
Size
Flow
Head
Application
Feature
MV/MVR
Vertical Sump Pump40PV-MV
40 - 250mm
17-1000 m3/h
4-40m
–Mineral Processing
–Fully elastomer lined or hard metal fitted
65QV-MV
–Coal Preparation
–Double suction semi-open impeller
100RV-MV
–Chemical Processing
–No submerged bearing or packing
150SV-MV
–Effluent Handling
–Optional recessed impeller and suction agitator available
200SV-MV
–Sand and Gravel
–MVR models feature full rubber covering for corrosion resistance
250TV-MV
–Waste Water
–Can be run in insufficient suction duties