Single rotor hammer crusher

In the case of seasonal downtime, or when shipped abroad, or stored outside the house (winter or summer time), in order to prevent the rust of the Zhongyi cone crusher used by many customers, the Sino-Italian mining machine relies on years of experience to summarize The following protective measures have been taken:

1. Remove the fixed cone, feed hopper, moving cone, bowl type tiling and eccentric components; disengage the oil drain pipe at the bottom of the main frame and the oil inlet at the bottom of the main shaft to ensure that all pipes and holes at the bottom of the main shaft are sealed with pipe plugs. .

2. Apply anti-rust lubricant to all inner surfaces of the spindle with a paint brush.

3. Use a paint brush to brush the anti-rust oil on the bottom thrust bearing, the outer surface of the main shaft and all the leakage surfaces of the pinion gear, and remove the oil supply hose of the drive shaft frame from the top or side of the drive shaft frame, and then Place the funnel on the mouth of the drive pedestal. While turning the drive shaft, pour the oil into the drive pedestal and finally reinstall the oil hose onto the drive pedestal.

4. Fill the roller lining hole of the main shaft until the hole is filled with oil, then drain the oil.

5. Apply anti-rust oil to the outer surface of the eccentric sleeve, the hole of the eccentric sleeve bushing, and the gear and the upper thrust bearing.

6. Apply a layer of anti-rust lubricant to the upper and lower bushings of the moving cone sphere and moving cone and all moving cone surfaces adjacent to the “T” shaped seal.

7. Reinstall the eccentric assembly and the bowl-type tile assembly, apply a layer of anti-rust lubricant on the support surface and exposed surface of the bowl tile, and then install the moving cone assembly and the feed plate.

8. Inject a similar anti-rust oil with a viscosity of 150 SSU at a temperature of 38 degrees (100 °F) into the fuel tank of the power unit.

Epoxy Hardener And Thinner

Epoxy Hardener And Thinner,Epoxy Resin And Hardener,Resin Epoxy Hardener,Epoxy Thinner For Coating

Luckypower Tech , https://www.lpsiliconeemulsion.com