Rubber sealed deep groove ball bearings have rubber seals installed on one or both sides and are pre-lubricated with grease. These bearings often Also, snap rings are sometimes used on the outside edge. rubber sealed deep groove ball bearings with their simple design, high resistance and low-maintenance, while many different retainers are available, pressed steel cages are most commonly used.
The primary function of the seal is to protect the bearing from contaminants, it is important to keep the bearing clean when you take it out of the packaging so you don`t contaminate it just by handling it. Another function is, of course, is to make sure the bearing retains the lubricant. because of the rubber lip that`s making contact with the inner ring, we have the rubber rubbing on the inner ring of the bearing, increasing the friction in the bearing.
Our rubber sealed deep groove ball bearings use unique design polyamide and steel cage, The inner/outer rings and retainer(cage) are thicker compare with the Common bearings, stronger rivet, which consist more reliable structure. strong impact and heavy load with Grinding groove and super finishing technology. to offer the long life under extreme harsh environment.
Sealed type: With one seal (-RS) on one side or two seals (-2RS) on both sides. Sealed bearings are supplied with a contacting lip seal that excels in protecting the bearing from liquids and other foreign contaminants. The inherent design creates friction, drag, and in turn heat; factors that require consideration in high speed applications.
Rubber Sealed Deep Groove Ball Bearing Rubber Sealed Ball Bearing,Rubber Sealed Deep Groove Ball Bearing,Rubber Seals Deep Groove Ball Bearing Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
Features
1. Electro and Mechanical Polishing
2. Sealing Material: PTFE, NBR, EPDM, FPM
3. Manufacture Standard: GB, DIN, ISO, SMS
4. Zero Leakage
5. Connection: Welding, Clamp
6. Tpye: Double-acting, Single-acting
Specifications
Inside and outside of body can be high-temperature sterilization
1). Nominal Diameter: DN15-50
2). Pressure Range: 0-16bar
3). Medium Temp: -20º C+150º C
4). Ambient Temp: -20º C+60º C
5). Diaphragm Material: EPDM, FPM, PTFE
6). Body Material: Stainless Steel
7). Body of Actuator: Aluminium Alloy
8). Connection: Tri-clamped, Welding, Flanged, Threaded
9). Driving Way: Pneumatic normally closed (1), normally open (2), double direction (3)
10). Useful: Pneumatic actuator D applied to pass body, Pneumatic actuator T applied to pass body and multiplass body
11). Max Pressure: 10 bar (diaphragm is EPDM or EPM), 6 bar (diaphragm is PTFE, one side shall be used)
12). Max Temperature: 150º C (according to the conditions of use)
13). Control Pressure: 4-6 bar (control way 1), 3-4 bar (control way 2 and 3)
Contact
Thanks for your visiting.
If you have any questions about our products or company, please do not hesitate to contact us.
Contact Person: Olivia
Â
Brand:
KT/OEM
Applicable Media:
Water, Oil, Gas, Nitric Acid, Acetic Acid
Certification:
CE/API/DNV/FDA/ISO9001-2008
Sample Testing:
One Sample for free( Under $10),Freight Collect
Packing:
Plastic Bag, Carton & Plywood Case/According to customers' requirement.
Payment:Â
T/T, L/C, D/P, Western Union, Paypal
Port:Â
NINGBO/SHANGHAI, Customers' Request
Delivery Time:
Within 35days after receiving T/T deposit Payment
Term of Delivery:
FOB/CNF/CIF, Customers' Request
Features
1. Electro and Mechanical Polishing
2. Sealing Material: PTFE, NBR, EPDM, FPM
3. Manufacture Standard: GB, DIN, ISO, SMS
4. Zero Leakage
5. Connection: Welding, Clamp
6. Tpye: Double-acting, Single-acting
Specifications
Inside and outside of body can be high-temperature sterilization
1). Nominal Diameter: DN15-50
2). Pressure Range: 0-16bar
3). Medium Temp: -20º C+150º C
4). Ambient Temp: -20º C+60º C
5). Diaphragm Material: EPDM, FPM, PTFE
6). Body Material: Stainless Steel
7). Body of Actuator: Aluminium Alloy
8). Connection: Tri-clamped, Welding, Flanged, Threaded
9). Driving Way: Pneumatic normally closed (1), normally open (2), double direction (3)
10). Useful: Pneumatic actuator D applied to pass body, Pneumatic actuator T applied to pass body and multiplass body
11). Max Pressure: 10 bar (diaphragm is EPDM or EPM), 6 bar (diaphragm is PTFE, one side shall be used)
12). Max Temperature: 150º C (according to the conditions of use)
13). Control Pressure: 4-6 bar (control way 1), 3-4 bar (control way 2 and 3)
Contact
Thanks for your visiting.
If you have any questions about our products or company, please do not hesitate to contact us.
Contact Person: Olivia
Â
Brand:
KT/OEM
Applicable Media:
Water, Oil, Gas, Nitric Acid, Acetic Acid
Certification:
CE/API/DNV/FDA/ISO9001-2008
Sample Testing:
One Sample for free( Under $10),Freight Collect
Packing:
Plastic Bag, Carton & Plywood Case/According to customers' requirement.
Payment:Â
T/T, L/C, D/P, Western Union, Paypal
Port:Â
NINGBO/SHANGHAI, Customers' Request
Delivery Time:
Within 35days after receiving T/T deposit Payment
Term of Delivery:
FOB/CNF/CIF, Customers' Request
Sanitary Diaphragm Valves of Positioner Single Acting Normally Closed
Model NO.: DN6-DN80
Place of Origin: Zhejiang
Diaphragm Material: EPDM, FPM, PTFE
Ball Assembly: Side Entry
Driving Way: Pneumatic, Normally Closed, Normally Open
Trademark: KT/OEM
Transport Package: Bubble Wrap, Carton Box, Plywood Case
Specification: CE, ISO9001, FDA, API, DNV
Origin: Zhejiang
HS Code: 8481202000
Model NO.: DN6-DN80
Place of Origin: Zhejiang
Diaphragm Material: EPDM, FPM, PTFE
Ball Assembly: Side Entry
Driving Way: Pneumatic, Normally Closed, Normally Open
Trademark: KT/OEM
Transport Package: Bubble Wrap, Carton Box, Plywood Case
Specification: CE, ISO9001, FDA, API, DNV
Origin: Zhejiang
HS Code: 8481202000
Sanitary Diaphragm Valve With Positioner Single Acting Normally Closed