Relocation of injection molding machine should pay attention to what issues

Introduction: Injection molding machines, also known as injection or injection molding machines. The main function is to heat the plastic and allow the molten plastic to be ejected and filled with the mold in a high pressure environment. Injection molding machines are currently divided into vertical, horizontal, all-electric.

What problems should be noticed when relocating the injection molding machine? The professional staff of the large-scale equipment relocation office in Beijing proposed the following suggestions:

1. Remove all accessories outside the machine before relocation. In addition, if it is a new machine, plastic packaging outside the machine is kept so as not to damage the appearance of the machine during the relocation process.

2. Before the relocation, all the hydraulic oil needs to be pumped out to prevent the liquid in the tank from flowing back.

3, if you need to hoist, you must find a professional lifting company to carry out operations, and pay attention to protect the rod.

4, in order to protect the injection molding machine from damage, in the relocation process is best to use air cushion relocation, this can reduce the risk of machine damage.

5. Perform appropriate reinforcement work on the moving parts of the injection molding machine to prevent them from slipping and damaging the components during the relocation process.

6. If demolition and relocation are adopted, the disassembled wires, tubing, and conveying lines shall be marked accordingly to avoid mistakes during the later installation.

7, for disassembled parts, should be cleaned in time, and do a good job of anti-rust work.

Source: Beijing Mingtong Gongda Lifting Engineering Technology Co., Ltd.