Shutter Door Roll Forming Machine
Shutter Door Roll Forming Machine Shutter Door Roll Forming Machine,Anti-Wind Shutter Door Roll Forming Machine,Anti-Wind Shutter Door Forming Machine,Garage Door Roll Forming Machine Botou Xianfa Roll Forming Machine Factory , https://www.rollformingmachinecn.com
Brief Introduction:
1. This hot air circulation oven is efficient and energy saving.Most of the hot winds are cycled within the box,which makes oven thermal efficiency improved 3-7% from traditional 35-45%, the highest thermal efficiency is up to 50%. Through the forced ventilation, the upper and lower temperature difference can be changed. It's characteristics are low noise, easy operation, automatic temperature-control and convenient maintenance. It can fully meetthe requirements of GMP.
2. The whole machine is made of stainless steel, carbon steel and contact material parts is
stainless steel. It is suitable for medicine, chemical, food, agricultural products, aquatic product, textile, heavy industry material heating, dehydrate and drying. For example, dehydrated vegetable, fruit, sausage and so on.Â
Working Principle:
The heat source is steam or electricity. The axial fan is used for heating the air of the heat exchanger in node of convective heat exchanging. The hot air stream transfers the heat to the material through the drying tray. The fresh air enters the drying box through air inlet hole for making-up. The humid air is exhausted from the dehumidifying hole. In this way, the machine keeps the proper relative humidity in the drying box.
Main technical parameters:
Model
Capacity (kg/h)
Power of fan (kw)
Steam consumption (kg/h)
Heat Radiating area (m2)
Volume of wind (m³/h)
Amount of tray
Amount of baker
Size(mm)
Weight (kg)
CT-C-O
50
0.45
10
10
3450
24
1
1430×1350×2300
400
CT-C-I
100
0.45
20
20
3450
48
2
2430×1350×2300
620
CT-C-II
200
0.9
40
40
6900
96
4
2430×2350×2300
1130
CT-C-III
300
1.35
70
80
10350
144
6
3300×2350×2300
1560
CT-C-IV
400
1.8
90
100
13800
192
8
4300×2350×2300
2120
Other Details:
Â
1.Package: wooden cases for sea transportation
2.Delivery time: 30 working days after receiving the deposit
3.Installation : engineers available for installation and training overseas
4.Guarantee : 12 months after it is sent out
Â
Plz feel free to contact me for any further information.
The shutter door machine has many type of design. The austrilia type use wide raw material width, and easy to make the door. The small type of shutter door strip has nice appearance, and durable product. Besides, there are some other type of shutter door machine, like anti-wind shutter door machine and fire proof shutter door machine. The fire proof shutter door machine has the steel frame with EPS inside.
TECHNICAL SPECIFICATION
(1) 5 tons hydraulic un-coiler:
Hydraulic motor drives. One single-head structure. It has a pressing arm to prevent the coil loose.
Electric uncoiling, hydraulic motor tenses the coil inner.
The max. coil inner-diameter is 508mm.
The max. coil outter-diameter is 1200mm.
The max. width of coil is 1250mm.
The max. capacity is 5 tons.
(2) Roll-Forming M/C:
Welded steel structure base, chains transmit, motor drives it. The machine include the filming device .
The roller is designed by Germany software COPRA, and has FEA analysis, which can promise the product precision.
Material of Roller: 45#, with hard chrome coated, polishing,
Voltage:380V/50Hz
(3) Hydraulic pressing/ Cutting:
Stop to press, Stop to cut, Post cut .Cutting tool material: Cr12, pressing tool material:40Cr.
Tolerance of the cutting length ±2mm.
(4) Product Rack
It is 2 parts, 6 meters total.
Un-powered.
(5) Hydraulic System:
It offers power for the cutter.
(6) Electrical System:
It uses Siemens PLC system to control the whole line. It can measure and cut the length automatically. Frequency adjusts the speed and it has the self-control speed function.
Human-machine screen, touch screen control. The length can be set in touch screen freely and operation is simple.
The surround connecting wires adopts aviation socket or fast-speed plug.
(7) Safety barrier system
Keep the workers safe when working.
Popular Hot Air Circulation Drying Oven
Model NO.: CT-C-0
Structure: Oven
Appearance of Dried Sample: Bulk
Type of Flow: Parallel Flow
Type of Atomization: Gas Atomization
Sprayer: Air-Flowing Type
Trademark: Genyond
Transport Package: Wooden Cases
Specification: CE ISO
Origin: Shanghai, China
Popular Hot Air  Circulation Drying Oven