Diammonium Phosphate is an excellent nitrogen & phosphorus neutral compound fertilizer and it is a kind of high concentration fertilizer, suitable for all kinds of crops and soil, especially suitable for high nitrogen phosphorus requirement of crops, it can be used as base fertilizer or top application. It can help the crops grow vigorously, improve fruit quality and yield, enhance crop resistance to disasters.
Diammonium Phosphate(DAP 18-46)
Purity
99.8%
Appearance
Grey or yellow granular
Nitrogen content
18% min
P2O5
46% min
Total nutrient
64% min
PH value
8.0
Moisture
2.5% max
Granular size
2-4mm 90% min
Water insoluble matter
0.02%max
Diammonium Phosphate Dap18-46-0 Fertilizer , Fertilizer Diammonium Phosphate , Dap 18-46-0 Fertilizer Hebei Woldi Trading Co.,LTD , https://www.woldiexport.com
Tons / shift
8 tons / person class
Diammonium Phosphate can be mixed with urea, ammonium nitrate, ammonium chloride, as it does not contain potassium, so can be used with potassium fertilizers such as Potassium Chloride, potassium sulfate
Point-and-column stratified filling mining method in Tonglushan Mine
Deposit account after the contact of magmatic skarn copper-containing magnetic iron deposit exploration type is a three to four. The mine's No. III ore body and the No. IV ore body are deep underground. The No. III ore body is about 370m long, with an average thickness of about 40m, a maximum thickness of more than 100m, an inclination of 50° to 75°, and a maximum extension of 830m. The No. IV ore body is 650m long, with an average thickness of 15m, a maximum thickness of 45m, a dip angle of 55° to 75°, and a maximum extension depth of 400m or more. The ore is mainly composed of copper magnetite, followed by copper-bearing marble and copper-bearing skarn. The copper-bearing magnetite is dense and hard, f=8～12, which is moderately stable to stable; the joints containing copper marble are relatively developed, f=7～9, which is moderately stable; the copper-bearing skarn f=3～6, stable Poor sex. The ore has a high grade and weighs 3.33t/m 3 . Ore body on the disc is marble, porphyry and granite diorite Skarnization plagioclase rock; is a lower plate and granodiorite porphyry Skarnization plagioclase pyroxenite. The marble is dense and lithological, f=7～9, the granodiorite porphyry is moderately stable, but most of it is weathered and the stability is poor; the skarnized plagioclase is soft, f=2~4.
The main mining method is the point-column upward stratified filling mining method. The length of the ore along the strike is 48m and 32m respectively according to the thickness of the ore body, of which the mine is 44m and 28m respectively, and the column is 4m. The stage height is 60m, the top column is 3~5m, and the bottom column is 6m (including 5.2m of ore bottom column and double reinforced concrete bottom column of 0.8m). In the mine, there are 1 to 2 rows of columns in the direction of the strike. The column spacing is 12 to 15 m, the point column size is 5 × 5 m, and the bearing area of ​​each point column is about 300 m 2 . The column and the point column account for 13-15% of the horizontal area of ​​the ore block; the semi-cylinder can be appropriately added when the surrounding rock is not stable. The stope area is 800-1200 m 2 and the maximum is 2000 m 2 .
The pick and return layout is shown in Figure 1.
Fig.1 Point-and-layer stratified filling method for Tonglushan Mine
1- along the pulse transport roadway; 2-passing the roadway; 3-filling the return airway; 4-lifting the patio;
5-filled patio; 6-filter well; 7-slide mine; 8-point column; 9-story column; 10-semi-cylinder;
11-reinforced concrete bottom column; 12-water sand filling; 13-cement filling [next]
The stratified mining height is 2.5-3.5 m, and the shallow hole mining method of first pressing the top and then pressing the top is generally adopted. In order to improve mining efficiency and improve working conditions, the YGPS42 two-way rail rock drill is used in conjunction with the CTC-300A simple mining drill in the stable roof of the roof to achieve a top picking, hole depth of 3.5m, aperture Ñ„44mm, mining efficiency. Increase by 70%.
The ore transport was originally carried out using ZYQ-14 type wind moving loader, and two sets were fixed in each mine. In 1983, the WY-1.5D (or WJ-76 type) electric scraper was used in combination with the loader, and the effect was good. Under normal circumstances, the electric scraper production capacity is equivalent to 2 to 3 sets of loaders. A single mesa flutter vibrating and concentrating machine is installed in the ore discharge shaft of the stope, and the vibration motor is 3~4kw.
Stope commonly used mortar Long Rope - up tube anchor - metal mesh and overhead guard measures. The length of the long anchor cable is 66mm, the diameter of the steel wire is 24.5mm, the mesh density of the anchor cable is 2.5×2.5～4×4m, and the initial anchor depth is 15m. The YGZ-90 external rotary drilling rig is equipped with a JT-25 disc bracket or a CTS-141 long anchor cable drilling rig. The rig is equipped with a self-made rope feeder that feeds the wire into the hole. The HP6-3 mortar pump was used for forward grouting, the ratio of sand to sand was 1:1, and the ratio of water to cement was 0.45. In order to improve the initial strength of the mortar, 0.8% FDN type water reducing agent can be added. The simulation test of the pile anchor cable shows that the gripping force is 29~41t/m, and the bonding force to different rocks is 34~60t/m.
The expansion type anchor rod has a length of 1.8 to 2.0 m, a mesh degree of 0.8×0.8 to 1.0×1.0 m, and an anchoring force of 10 to 12 t. The metal mesh is made of ф6~8mm steel bars and spot welded according to 200×200mm mesh.
The filling is made of water-quenched copper slag hydraulic filling and tailings cementing. The thickness of the cemented surface is 0.4m and the strength is 2.94~3.92MPa.
The main road for slag filling is 150mm cast iron pipe, and the 4-inch portable steel pipe is used in the stop. The filling line is 2.5 to 6.5, the weight concentration is 45 to 55%, and the hourly filling capacity is 45 to 60 m 3 . The slag has an average particle diameter of 3.5 mm and a void ratio of 48%, and has good permeability.
The tailings cement conveying main pipe is 100mm steel pipe, 100mm plastic pipe is used in the mining yard, the slurry weight concentration is 70~75%, the sand-sand ratio is 1:5～1:6, and the filling capacity is 25～40m 3 /h. A steering nipple with a sleeve inside is installed at the bottom of the filling patio to facilitate the steering movement of the filling pipeline.
The use of the point-column filling method results in a large loss of rich copper ore, and only the ore loss in the column and the inter-column accounts for more than 15%. The mine is steeply inclined ore body, and the point column near the upper plate cannot support the rock on the upper plate, but reaches the transportation level in the upper stage of maintenance. The point column in the upper and lower stages is difficult to be aligned, thus supporting the point column. Greatly reduced. [next]
The main technical and economic indicators are shown in Table 1.
Table 1 Main technical and economic indicators of the upward stratified filling method
Mine name
Cutting ratio (m/kt)
Ore block production capacity (t/d)
Rock drilling
Mining
equipment
Taiwan effect (meter / Taiwan class)
equipment
Taiwan effect (ton / shift)
Fankou lead zinc ore
4.4~4.8
Panel
400~500
YT-30
CTC-102 drilling rig
Plutor
43.9
48.9
100
TORO-100DH scraper
LF4.1 scraper
167
246.7
Hongtoushan Copper Mine
6.5~7.5
200~250
YSP-45, 7655
74~125
TORO-100DH
LK-1 scraper
LF-4.1
186~210
Huangshaping lead-zinc mine
30.1
47
YSP-45, YT-25
78.7 tons / shift
Electric raft 30kw
80~100
Jiaojia Gold Mine
17~18
30
7655
40
Electric raft 14kw
40
Jinchuan No. 2 Mining Area
60~80
YT-25
Electric raft 30kw
Fenghuangshan Copper Mine
13.7
100~250
BVK87/1800 drilling rig
BBC-25W, BBC-16W
60
T 4 G
80~100
Tonglushan Copper Mine
2.5~3.5
130~180
YSP-47
YT-25
85~105
45~65
WI-1.5D or WJ-76
Electric scraper or T 4 G
100~200
Big tea garden mine
9.5
3287 tons / month
L832C drilling rig
L400 rock drill
98.9
LF4.1 scraper
167.1
711 mine
55.5
01-45, YT-25
YT-30
28.8
Electric pick 28~30kw
59
Mount Isa Lead-Zinc Mine (Australia)
700
Double drilling rig
90~103
ST-5 scraper
58
Strathcon Nickel Mine (plus)
Panel 700~950
Double drilling rig
AL-60 rock drill
100~200
ST-4A Scraper
1500 tons / month
Rudna Copper Mine (wave)
Panel 4500 tons / month
Double drilling rig
LK-1, K-2 scraper, 15t automatic mine car
Unfinished, see continued table 1 [next]
(Continued) Table 1
Mine name
Mining worker labor productivity (ton / work class)
Loss rate (%)
Depletion rate (%)
Main material consumption
cost
Cement (kg/t)
Wood (m 3 /t)
Explosives (kg/t)
Mining workshop (yuan/ton)
Direct cost (yuan/ton)
Filling cost (yuan/ m3 )
Fankou lead-zinc mine
30.96
<4
13.8
50~60
0.385
30.5
11.06
30.94
Hongtoushan Copper Mine
24~31
<5
18~27
14
0.8~1
0.36
25.83
2.18
13.07
Tongshaping lead-zinc mine
7.47
3.14
18.75
33.65
4.72~6.38
11.65
Jiaojia Gold Mine
4.78
15.2
17.8
42.5
3
0.3
7.14
14.0
Jinchuan No. 2 Mining Area
9~11
0.3~0.7
0.6~1.2
70~100
3~4
0.3
6~7
11~12 (yuan/ton)
Fenghuangshan Copper Mine
10~15
>20
6.1 (excluding the column)
3.22
Tonglushan Copper Mine
12.4~16.4
>20~30
3~5
14~16
0.16
0.24~0.25
21.5~26
3.4~4.7
21.3~24.6
Big tea garden mine
10.9
2.8
11.4
0.522
32.4
12.0
711 mine
4.62
3~5
10~13
Mount Isa Lead-Zinc Mine (Australia)
130
10
10
0.18~0.20
Strathcona Nickel Mine (plus)
48
18 (excluding top and bottom columns)
Rudna Copper Mine (wave)
Full member
10~15
20