1. Description
Twin screw extruder recycling &Â pelletizing system are applied to the waste materials,which needs high processing performance of melting,volatilization,filtering etc.,mainly works for the job of PET scraps recycling and re-pelletizing.
To slow down IV value reducing during PET scraps recycling,not only impurities,such as PVC content,moisture,etc.,but also precise recycling system and reliable equipment configurations are necessary to put in the solution.Â
2. Pre-processing equipment required according to the condition of various PET scraps;
Special designed compactor applied to handle low bulk density scraps,such as film,filament,etc
Pre-crystallization system is required to pre-dry PET regrinds,flakes to guarantee final productions quality.
Specifications:
Model Name
ACTÂ Series
Recycling Material
Waste film, filament, flakes, and regrinds of PET etc.
Final Product Shape
Pellets/ Granules
System Composition
Lifting-type drying hopper, Screw loader, Volumetric twin screw metering feeder, Twin screw extruder, Electric control system, water cooling strands pelletizing system.
Output Range
350kg/h-800kg/h
Feeding Device
Screw loader (standard)
Screw Diameter
71.2/91mm (standard)
Screw material
38CrMoAlA nitride steel( SACM-645), bimetallic (Â Optional)
Screw L/D
36
Barrel's Heating
Ceramic heater or Casting Aluminum heater
Barrel's Cooling
Water cooling through cooling system
Vacuum Degassing
Double vented degassing (Standard)
Pelletizing Type
Strands pelletizing
Voltage Standard
Depending on project's location
Delivery Time
60 days after order takes effect.
Warranty
13 months since date of bill of lading
Technical Service
Project design, suggestion on factory construction, installation and commissioning
Main technical parameter:
Machinery Size
Data of Compactor
Data of twin screw extruder
Throughout rate(Kg/hr)
Efficiency Volume(Liter)
Motor power(Kw)
Diameter of screw(mm)
L/D
Motor power(Kw)
ACT800/75
800
90
71.2
36
132
350-450
ACT1000/95
1000
110
91
36
200
500-600
ACT1200/95
1200
132
91
36
250
600-800
Intelligence and controllable system
Intelligence Start:One button only
Following set logistical sequence and materials processing requirement,interlocked system modules can start by"one button only",to avoid mistake or fault occurred by manual operation.
Intelligence Stop:One button only
Each related modular part in ACT system available to shut down by only one button,to protect whole ACT system fromfault off hand operation.
Emergency Sop
Emergency stop function is available in ACT system in case that uncertain risk occurred during machine running.
System program remote monitoring and transmission system
Ethrnet+Bluetooth
Both are available for ACT system realizing functions of remote monitoring and information transmission.
Protection system
Life safety protection
ACT system fully understanding safety issue during the actual operation step.Each operating position and rotating part equipped with electrical safe switch,to guarantee producing process safely and ensure clients staffs life safety from potential risks during machine's running.
Plastic performance keeping
Thanks to precise temperature controlling and optimized plasticization design,ACT system ensure the reliable quality output of plastic granules.
Protection of over-heating to compactor
Following the logistics of each modular part in ACT system and with well understanding on each recycle specification ,ACT system can guarantee related recycles with optimized pre-heating and compacting conditions in the compactor,preventing plastic recycles from overheating or degradation in the compactor.
Service and support
Overseas installation and training are available;Machine warranty with spares in stocking and in-time delivery.
Advantages of ACT compacting and pelletizing systemÂ
Combine crushing,compacting and pelletizing steps in one system,less-labor cost;
Higher efficiency feeding,suitable to film,filament,raffia,foaming materials;
Higher output and lower energy consumption.
Other benefits
Lower investment cost for a high quality and durable machine;
Low energy consumption with high production output;
Fast machine delivery and installation:AceRetech produces on an average of 10 sets of plastic machine per month and can deliver the machine faster than most manufacturers.
The regular delivery time of an AceRetech recycling machine is 30 working days.
Contact to Aceextech:
ACEEXTECH MACHINERY CO,LTD-ACEÂ
Tel:+86-512Â 58620105
Fax:+86-512 58620107
Tel:18021237973Â
Add:No.18 Yufeng Road,Nanfeng Town,Zhangjiagang City Jiangsu,21562
Â
Pet Bottle Flakes twin screw pelletizing extruder
1. Description
Twin screw extruder recycling &Â pelletizing system are applied to the waste materials,which needs high processing performance of melting,volatilization,filtering etc.,mainly works for the job of PET scraps recycling and re-pelletizing.
To slow down IV value reducing during PET scraps recycling,not only impurities,such as PVC content,moisture,etc.,but also precise recycling system and reliable equipment configurations are necessary to put in the solution.Â
2. Pre-processing equipment required according to the condition of various PET scraps;
Special designed compactor applied to handle low bulk density scraps,such as film,filament,etc
Pre-crystallization system is required to pre-dry PET regrinds,flakes to guarantee final productions quality.
Specifications:
Model Name
ACTÂ Series
Recycling Material
Waste film, filament, flakes, and regrinds of PET etc.
Final Product Shape
Pellets/ Granules
System Composition
Lifting-type drying hopper, Screw loader, Volumetric twin screw metering feeder, Twin screw extruder, Electric control system, water cooling strands pelletizing system.
Output Range
350kg/h-800kg/h
Feeding Device
Screw loader (standard)
Screw Diameter
71.2/91mm (standard)
Screw material
38CrMoAlA nitride steel( SACM-645), bimetallic (Â Optional)
Screw L/D
36
Barrel's Heating
Ceramic heater or Casting Aluminum heater
Barrel's Cooling
Water cooling through cooling system
Vacuum Degassing
Double vented degassing (Standard)
Pelletizing Type
Strands pelletizing
Voltage Standard
Depending on project's location
Delivery Time
60 days after order takes effect.
Warranty
13 months since date of bill of lading
Technical Service
Project design, suggestion on factory construction, installation and commissioning
Main technical parameter:
Machinery Size
Data of Compactor
Data of twin screw extruder
Throughout rate(Kg/hr)
Efficiency Volume(Liter)
Motor power(Kw)
Diameter of screw(mm)
L/D
Motor power(Kw)
ACT800/75
800
90
71.2
36
132
350-450
ACT1000/95
1000
110
91
36
200
500-600
ACT1200/95
1200
132
91
36
250
600-800
Intelligence and controllable system
Intelligence Start:One button only
Following set logistical sequence and materials processing requirement,interlocked system modules can start by"one button only",to avoid mistake or fault occurred by manual operation.
Intelligence Stop:One button only
Each related modular part in ACT system available to shut down by only one button,to protect whole ACT system fromfault off hand operation.
Emergency Sop
Emergency stop function is available in ACT system in case that uncertain risk occurred during machine running.
System program remote monitoring and transmission system
Ethrnet+Bluetooth
Both are available for ACT system realizing functions of remote monitoring and information transmission.
Protection system
Life safety protection
ACT system fully understanding safety issue during the actual operation step.Each operating position and rotating part equipped with electrical safe switch,to guarantee producing process safely and ensure clients staffs life safety from potential risks during machine's running.
Plastic performance keeping
Thanks to precise temperature controlling and optimized plasticization design,ACT system ensure the reliable quality output of plastic granules.
Protection of over-heating to compactor
Following the logistics of each modular part in ACT system and with well understanding on each recycle specification ,ACT system can guarantee related recycles with optimized pre-heating and compacting conditions in the compactor,preventing plastic recycles from overheating or degradation in the compactor.
Service and support
Overseas installation and training are available;Machine warranty with spares in stocking and in-time delivery.
Advantages of ACT compacting and pelletizing systemÂ
Combine crushing,compacting and pelletizing steps in one system,less-labor cost;
Higher efficiency feeding,suitable to film,filament,raffia,foaming materials;
Higher output and lower energy consumption.
Other benefits
Pet Bottle Flakes Twin Screw Pelletizing Extruder
Model NO.: ATE
Customized: Customized
Certification: CE, ISO9001:2008
Condition: New
Controller: Siemens PLC
Motor Brand: Siemens, Weg, Sew
Bearing: SKF, NSK
Output Capacity: 350-800kg/H
Suitable Material: PP/PE/PS/PA/Pet Plastic, Pet Flake
Trademark: ACEEXTECH
Transport Package: Wooden Pallet
Specification: ATE75
Origin: China
HS Code: 8477209000
Model NO.: ATE
Customized: Customized
Certification: CE, ISO9001:2008
Condition: New
Controller: Siemens PLC
Motor Brand: Siemens, Weg, Sew
Bearing: SKF, NSK
Output Capacity: 350-800kg/H
Suitable Material: PP/PE/PS/PA/Pet Plastic, Pet Flake
Trademark: ACEEXTECH
Transport Package: Wooden Pallet
Specification: ATE75
Origin: China
HS Code: 8477209000
Pet Bottle Flakes twin screw pelletizing extruder