Model NO.: SS Forged Fitting Cross
Model NO.: SS Forged Fitting Cross
  Product Type:
       Â
        Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,
       Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,
       Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
Â
Size:
      Â
       1/2" to 4"(DN15~DN100)
Â
Range(Wall Thickness):
       3000LB to 9000LB
       XS, Sch80, Sch160, XXS.
Â
Standard:
       ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
Â
Material:
       Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel,Â
       Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.
Â
+ SOCKET WELD FITTINGS
       A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
       To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.
Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.
SW Fittings are family of High Pressure Fittings are used in various industrial processes.
Â
Types of Threaded Fittings by Class and Size
Description |
Class Designation  |
3000 |
6000 |
9000 |
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
Pipe Size by Wall Thickness |
SCH 80 / XS |
SCH 160 |
XXS |
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS
+THREADED FITTINGS
       Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
Types of Threaded Fittings by Class and Size
Description |
Class Designation
|
2000 |
3000 |
6000 |
Elbows 45 and 90 degrees Tees, Crosses, Coupling Half-Coupling, Cap |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
Pipe Wall |
SCH 80 / XS |
SCH 160 |
XXS |
Plugs and Bushings are not identified. They may be used up through Class 6000Â Â
  Product Type:
       Â
        Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,
       Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,
       Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
Â
Size:
      Â
       1/2" to 4"(DN15~DN100)
Â
Range(Wall Thickness):
       3000LB to 9000LB
       XS, Sch80, Sch160, XXS.
Â
Standard:
       ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
Â
Material:
       Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel,Â
       Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.
Â
+ SOCKET WELD FITTINGS
       A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
       To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.
Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.
SW Fittings are family of high pressure fittings are used in various industrial processes.
Â
Types of Threaded Fittings by Class and Size
Description |
Class Designation  |
3000 |
6000 |
9000 |
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
Pipe Size by Wall Thickness |
SCH 80 / XS |
SCH 160 |
XXS |
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS
+THREADED FITTINGS
       Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
Types of Threaded Fittings by Class and Size
Description |
Class Designation
|
2000 |
3000 |
6000 |
Elbows 45 and 90 degrees Tees, Crosses, Coupling Half-Coupling, Cap |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
1/2 - 4 |
1/2 - 2 |
1/2 - 2 |
Pipe Wall |
SCH 80 / XS |
SCH 160 |
XXS |
Plugs and Bushings are not identified. They may be used up through Class 6000Â Â
DIN Ball Valve
The ball valve, the opening and closing (ball) is driven by the stem and revolves around the axis of the ball valve. The sealing performance is good,the seal of the hard sealed ball valve is made by artificial grinding until the valve core is in perfect agreement with the seal ring. So its sealing performance is reliable.The switch is light.
We provide trunnion ball valve,electric ball valve,motorized ball valve,on off ball valve etc.
Production Size:DN15-DN250mm
Pressure range:PN10,PN16
Design Standard:DIN3357/EN12516
Face to Face:DIN3202/EN558-1 DN15-DN100(F4) DN125-DN250(F5)
Flange Standard:EN 1092/DIN2533
Testing Standard:EN12266
Main Material of parts:
Body:GG20/GG25/GGG45/GGG50
Bonnet:GG20/GG25/GGG45/GGG50
Ball:2Cr13/SS304/SS316
Seat:PTFE/RPTFE/TFM1600
Ball valves are widely used in petroleum refining, long-distance pipeline, chemical industry, paper, pharmaceutical, water conservancy, electric power, municipal, steel and other industries.
Ball Valve
Metal Seated Ball Valve,Double Block And Bleed Ball Valve,Hydraulic Ball Valve,Double Union Ball Valve
CANGZHOU HENGJIA PIPELINE CO.,LTD , http://www.czhjpipe.com