Mini Air Blower Pump for SPA and Swimming Pool

Mini air blower pump for SPA and swimming pool

1. Description of air pump

1).Solids and impurities must be eliminated before entering the AQUA gas ring Vacuum 
pump (intake filter).

2).Gas ring vacuum pumps can be installed in any axial possession.

3).Do not obstruct the cooling system.

4).Keep ventilation gratings and opening clear.

5).The direction of flow is indicated by an arrow.

6).Opposite direction od rotation and thus opposite direction of flow available on request

2. Specification of air pump

3. Pictures of air pump





4. Parameters of air pump

5. Features of air pump

1).The impeller adopts thethree-dimensional design combined with setional changes in circular air paths, which is smooth for airflow and low in noise.

2).Adopt special super- quality motor that is short in starting torque, stable in operation and low in power consumption but excellent in performance.

3).Non-oil lubricating designs to produce more purified air.

4).The appearance is beautiful and modern, the structure is reasonable and compact, it is long service life. 

6. Use and Maintenance
1).You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump.

2).Direct coupled type pump units:the chassis must remain stable, so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacuum.

3).You should stop the engine if you discover abnormalities(such as noise, shock, hydraulic discharge descend etc.),and attention the bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in the pump, overhaul and oil, keep it in a dry and ventilate shade. 
In winter, you should discharge the water at once when you stop using it in case frost crack.After the pump every 1000 hours operating time, you should take down and clean the bearing, and exchange quick-wear parts.

7. Company Information
Company Overview: 
Guangzhou Fenlin Sauna Equipment Co., Ltd, established in 2005, professional in producing and selling sauna equipments, swimming pool equipments, SPA equipments and fountain equipments.etc. 

Striving in creating, quality and service for these years, we have possessed our own brand, in the meantime, have developed our foreign market of around one hundred countries as well as developed a sales network covers most of the eastern big cities at home. 

Goods: 
We manufacture equipments and accessories of our brands. We also have got the representative authorization of some famous brand in these regions. 
Products can be divided into sauna series, steam series, swimming pool series and outdoor fountain series. 

Factory:
The factory is located in Baiyun district of Guangzhou, about 5 minutes to Guangzhou Airport by car. Established in 2005 and now occupying an area of about 10000 square meters, more than 100 workers and 11 production lines. Under the systematically management and strict quality control, we have earned good reputation among the industry. 

We provide clients with services as product sourcing, design and engineering, OEM manufacturing, quality control, shipment inspection.



8. FAQ
1). Are you a factory or a trading company?
A: we are a factory over many years experience in MUSIC FOUNTAIN, SWIMMING 
POOL ACCESSORIES, SPA EQUIPMENT, SAUNA STEAM PRODUCTION field.

2). What certificate do you have?
A: we have CE and SGS, ISO9001

3). What is the main products you do?
A: our main products are stainless music fountain, sauna equipment and swimming 
equipment.

4). Where is your factory? Can I visit there?
A: our factory is located in Guangzhou Baiyun District 5 minutes from Guangzhou 
Airport. Welcome to visit our factory. 

5). Can you do OEM or ODM?
A: Yes, we accept OEM and ODM

6). What about the delivery and payment?
 A: Delivery: By sea, By air, By Express Courier, It is up to you.
     Payment: Paypal, Western Union, HSBC T/T

If you are interested in our products , pls don't hesitate contact us now . We will offer you the best products with the service .

Mini air blower pump for SPA and swimming pool

1. Description of air pump

1).Solids and impurities must be eliminated before entering the AQUA gas ring Vacuum 
pump (intake filter).

2).Gas ring vacuum pumps can be installed in any axial possession.

3).Do not obstruct the cooling system.

4).Keep ventilation gratings and opening clear.

5).The direction of flow is indicated by an arrow.

6).Opposite direction od rotation and thus opposite direction of flow available on request

2. Specification of air pump

3. Pictures of air pump





4. Parameters of air pump

5. Features of air pump

1).The impeller adopts thethree-dimensional design combined with setional changes in circular air paths, which is smooth for airflow and low in noise.

2).Adopt special super- quality motor that is short in starting torque, stable in operation and low in power consumption but excellent in performance.

3).Non-oil lubricating designs to produce more purified air.

4).The appearance is beautiful and modern, the structure is reasonable and compact, it is long service life. 

6. Use and Maintenance
1).You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump.

2).Direct coupled type pump units:the chassis must remain stable, so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacuum.

3).You should stop the engine if you discover abnormalities(such as noise, shock, hydraulic discharge descend etc.),and attention the bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in the pump, overhaul and oil, keep it in a dry and ventilate shade. 
In winter, you should discharge the water at once when you stop using it in case frost crack.After the pump every 1000 hours operating time, you should take down and clean the bearing, and exchange quick-wear parts.

7. Company Information
Company Overview: 
Guangzhou Fenlin Sauna Equipment Co., Ltd, established in 2005, professional in producing and selling sauna equipments, swimming pool equipments, SPA equipments and fountain equipments.etc. 

Striving in creating, quality and service for these years, we have possessed our own brand, in the meantime, have developed our foreign market of around one hundred countries as well as developed a sales network covers most of the eastern big cities at home. 

Goods: 
We manufacture equipments and accessories of our brands. We also have got the representative authorization of some famous brand in these regions. 
Products can be divided into sauna series, steam series, swimming pool series and outdoor fountain series. 

Factory:
The factory is located in Baiyun district of Guangzhou, about 5 minutes to Guangzhou Airport by car. Established in 2005 and now occupying an area of about 10000 square meters, more than 100 workers and 11 production lines. Under the systematically management and strict quality control, we have earned good reputation among the industry. 

We provide clients with services as product sourcing, design and engineering, OEM manufacturing, quality control, shipment inspection.



8. FAQ
1). Are you a factory or a trading company?
A: we are a factory over many years experience in MUSIC FOUNTAIN, SWIMMING 
POOL ACCESSORIES, SPA EQUIPMENT, SAUNA STEAM PRODUCTION field.

2). What certificate do you have?
A: we have CE and SGS, ISO9001

3). What is the main products you do?
A: our main products are stainless music fountain, sauna equipment and swimming 
equipment.

4). Where is your factory? Can I visit there?
A: our factory is located in Guangzhou Baiyun District 5 minutes from Guangzhou 
Airport. Welcome to visit our factory. 

5). Can you do OEM or ODM?
A: Yes, we accept OEM and ODM

6). What about the delivery and payment?
 A: Delivery: By sea, By air, By Express Courier, It is up to you.
     Payment: Paypal, Western Union, HSBC T/T

If you are interested in our products , pls don't hesitate contact us now . We will offer you the best products with the service .

Leather Sewing Machine specialized in genuie leather, real leather sewing, good for tough and thick leather sewing, such as  handbag sewing, shoe sewing machine, footwear sewing, belt sewing, velcro sewing, braided strap sewing, Computerized Sewing Machine with the high speed sewing and exquisite lines for high productivity, sewing speed can reach 2700rpm, New technology design for low power comsumption, low noise, low vibration, 

Leather sewing machine

Leather sewing machine, computerized sewing machine, computer sewing machine, handbag sewing machine, shoe sewing machine, footwear sewing machine, belt sewing machine, velcro sewing machine

Shenzhen Chaocheng Sewing Technology Co., Ltd , https://www.cn-chache.com