Leak in car tank teaches you simple and practical maintenance skills

If the owner finds a water leak in the tank, he can go to the repair shop to check it and replace it with a new one. If the leaking situation still exists, the owner should consider:

1. Check whether the water tank cap has been fastened;

2. Test the gas into the tank to see if the water in the tank is leaking from which position, and then decide on the repair plan;

3. Unscrew the cover of the engine plus oil to see if there is traces of inorganic oil emulsification (punch or corrosion phenomenon). If so, disassemble the engine to replace the cylinder pad;

4. Water tank quality problems.

If the car is in the process of driving, due to vehicle vibration or vehicle accident, when the water tank water pipe ruptures and leaks, measures can be taken according to specific conditions: when the leaking point does not exceed 1mm crack or 2mm hole, add a bottle of water tank to the water tank Leakage agent, start the car to run.

5 to 10 minutes after the cooling water is turned on, the cooling system will stop leaking at the leaking water (or antifreeze) regardless of whether it is a water tank, a rubber hose or a mat, and it will not need to be released after the leakage is stopped. This will not affect the heat dissipation and Blockage occurs.

If there is no anti-leakage agent to carry, the individual heat pipe leaks lightly, and the loose tobacco can be temporarily put into the water tank to make use of the circulating pressure of the water to make the tobacco block plug in the leaking part of the heat pipe and temporarily use it.

For water tank cooling pipe leakage is more serious, you can cut the leaky heat pipe from the leak, with a soap coated cotton mass cut off the heat pipe, and then use the pliers to cut flat heat pipe head flattened and then crimped Press tight to stop leaking.

If the rubber pipe joint is leaking, use a screwdriver to wrap the rubber pipe joint clamp in the rubber pipe joint and then tighten it with pliers. If the rubber tube is damaged, use a tape to wrap it tightly and temporarily use it.