LCD Platelet Agitator Incubator Blood Bank Equipment

Model NO.: ZJSW-1A
Model: Zjsw-1A
Power: 220V 50Hz
Electric Power: 220V AC,50Hz
Interior Dimensions W*D*H(mm): 300*300*230
Agitationflatbed: 60 Times Per Minute, 50mm(for Demend)
Trademark: SUGOLD
Transport Package: Wooden Case
Specification: GMP
Origin: Zhejiang, China
HS Code: 9031200090

 LCD platelet agitator incubator
 
LCD Platelet Agitator Incubator Blood Bank Equipment

 
Characteristics
 
 1.Uses the industry tread warm electric circuit, to enhance compatibility of the electrically controlled system to the environment
 
 2.Uses the advanced WATCHDOG technology, to strengthen guarding against "down" of the computer of the monolithic integrated circuit
 
 3.Uses the redundant technology additionally builds the temperature monitoring alarm circuit for the independent real-time box
 
 4.Uses the internationally advanced MAXIM & DALLAS High accuracy numeral temperature sensor, Auxiliary revised by the software compensation to guarantee temperature survey accurately
 
 5. With UPS which can maintain the alarm and supervision functions for more than 72 hours
 
 6.Uses the double-decked transparent gate, to facilitate open-and-close process and install the door lock, the environmental protection HCFC-141b foaming agent.
 
 7. Uses the fault display panel, to display the machine under fault spot for convenient service.
 
 8.Use more entire English recording printing setting for convenient user's achievement.
 
Technological parameter
Electric power 220VAC±10%,   50HZ
Conserve temperature 22C±2C
Agitationflatbed, 60 times per minute,  50 mm (for demand)
 

Model		 Demension(mm) Storage area and layers(W*D*H)mm Storage bags
ZJSW-1A  540*605*960   300*300*230  5 layers   5-10 bags
ZJSW-1B  540*605*960   390*300*300  7 layers   7-14 bags
ZJSW-2A  680*670*1050   480*300*390   10 layers   20-30 bags
ZJSW-2B   680*670*1050   480*300*390   11 layers   22-33 bags
ZJSW-4A  680*670*1400 480*300*680    20 layers   40-60 bags
ZJSW-1E  1170*650*1570 980*300*810  20*2Two doors,40 layers   80-120 bags

 
 

A pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air, supplied by an air compressor. Pneumatic Tools can also be driven by compressed carbon dioxide (CO2) stored in small cylinders allowing for portability. Pneumatic tools are safer to run and maintain than their electric power tool equivalents, and have a higher power-to-weight ratio, allowing a smaller, lighter tool to accomplish the same task. General grade pneumatic tools with short life span are commonly cheaper and are also called disposable tools in tooling industries while industrial grade pneumatic tools with long life span are more expensive. In general, pneumatic tools are cheaper than the equivalent electric-powered tools.

Air tools were formerly unpopular in the DIY (Do it yourself) market, but are becoming increasingly popular, and have always been ubiquitous in industrial and manufacturing settings.

It is important to know some general specification technical terms used in pneumatic tools while it is also related to how to choose a good air compressor and if the tool can meet your job requirement so that an air tool can be used properly, respectively, Free Speed (rpm), Air Pressure(psi/bar), Air Consumption(cfm/scfm or m3/min), Horse Power(hp), spindle size...etc. Depending on different type of pneumatic tools, there are different specification values that you need to pay attention to.

Flow or airflow, related to air consumption in pneumatic tools, represents the quantity of compressed air that passes through a section over a unit of time. It is represented in l/min, m3, at the equivalent value in free air in conditions of standard reference atmosphere (SRA), i.e. +20 c, 65% of relative humidity, 1013 mbar, in accordance with norms NFE.

Pneumatic Tools

Pneumatic Tools,Pneumatic Cylinder,Pneumatic Fitting,Pressure Gauge

Changzhou Edaweld Trading Company Limited , https://www.edaweld.com