Now many scenic spots or high-speed railway stations will see the electric sightseeing car. Perhaps many of my friends think that it must be very simple to operate. I think I can use it. In fact, it is just like an embroidery needle. It is not easy to look at simple things. Although the driving threshold is low, there is no need for a driver's license, but it is still a little difficult for novices. After all, novices don’t know much about the driving performance of the vehicle, clutches, brakes, etc. If they want to drive without training Not easy. Therefore, in order to enable some novices to be more proficient in driving electric sightseeing vehicles, here are some basic procedures for sharing how electric sightseeing vehicles should operate. A: Driving a sightseeing car with a transmission 1. First insert the key into the power switch and turn it to the ON position. This is similar to the ladies electric car, easy to understand 2. Press the green part of the direction selector switch to the forward position. 3. Release the parking brake, depress the clutch pedal, and set the shift lever to the low gear (1st or 2nd gear), release the clutch, and evenly depress the accelerator pedal to start the vehicle. 4. When parking, release the accelerator pedal and slowly depress the brake pedal. After the vehicle stops, pull up the parking brake. two. Driving electric sightseeing car without transmission 1. Insert the key into the power lock switch and turn it to the ON position. 2. Press the green part of the direction selector switch to the forward position. 3. Release the parking brake and press the accelerator pedal evenly to start the car. The higher the accelerator pedal is, the faster the car is pressed. 4. When parking, release the accelerator pedal and slowly depress the brake pedal. After the vehicle stops, pull on the parking brake. Xiao Bian has shared its operating procedures with you in two ways. In fact, these two aspects are just different in the third step. The transmission is to step on the brake pedal. Without the speed change, of course, the accelerator pedal is stepped on. This difference hopes to help new drivers. Non Slip Mat,Foam Anti-Slip Mat,Non Skid Mat,Pvc Foam Mat Shenzhen Molding & Forming Industries Co.,ltd , https://www.mfi-cn.com