CNC plasma cutting machine has many advantages such as simple operation, high precision, high work efficiency, low labor intensity, etc. It is widely used in many kinds of processing parts. CNC plasma cutting machine is often used in many industries, such as: chemical machinery, automotive industry, general engineering machinery. However, in recent years, many accidents have occurred due to the failure of the CNC plasma cutting machine. Therefore, in the process of using CNC plasma cutting machines, we must abide by the correct operating procedures of the CNC plasma cutting machine and take relevant measures to ensure its own safety.
We specialize in custom blister packaging more than 21 years ,such as thermofoemed plastic insert tray ,clamshell packaging ,Flocking Blister Tray and Clear Plastic Box .
We have professional R&D and designers to design the shape of the blister tray together with yourside, and the blister tray is well placed in the box to increase the image of your products.
Blister tray is widely used in all walks of life, these products can show your products well.
Different types of blister tray
Order process
Blister Tray,Custom Plastic Blister Tray,Blister Insert Tray,Custom Capsule Blister Pack Shenzhen Stardeal Industrial Co.,Ltd , https://www.plasticblisterpacks.com
The following Xiao Bian gives you a brief introduction about the safety and protection measures that CNC plasma cutting machines should take.
1. Operators must wear protective masks, welding gloves, caps, dust masks, and acoustic earmuffs. Persons who do not wear protective glasses are strictly prohibited from directly observing the plasma arc. Exposed skin is strictly prohibited from approaching the plasma arc.
2, when cutting, the operator should stand upwind operation. The air can be drawn from the lower part of the table and the open area on the operating table should be reduced.
3, when cutting, when the no-load voltage is too high, should check the electrical grounding, access to zero and cutting torch handle insulation, the workbench should be insulated from the ground, or in the electrical control system installed no load circuit breaker.
4. The high-frequency generator should be provided with a shielding shield. After high-frequency arc ignition, the high-frequency circuit should be cut off immediately.
5. The use of tantalum and tungsten electrodes shall comply with Article 12.7.8 of JGJ33-2001.
6, cutting operations and personnel must wear protective equipment as required. It must also take measures to prevent electric shocks, falling from high altitudes, gas poisoning and fire accidents.
7. The electric welding machine used on site shall be provided with a rain shelter, moisture-proof and sun-protecting hangar, and corresponding fire-fighting equipment shall be installed.
8. Seat belts must be fastened when welding or cutting at high altitude. Fire protection measures should be taken around and below the welding cuttings, and should be guarded by special persons.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
