The Whole Tyre Crusher
Model: XY-SH800 / XY-SH1200
Specifications:
At the room temperature, put the tyre or large plastics of rubber into the press directly,which can be crushed into 1-8cm pieces.
Advantages:
1.Compact structure, advanced technology, low energy consumption, high efficiency;
2.The crushing chamber is an open structure,which is convenient for maintenance;
The knife is made of hard alloy steel, which has high hardness, high wear resistance and can be used repeatedly;
3.This machine adopts the hardened reducer, round screen for structural steel wire mesh, large blanking area,which is good for qualified rubber material screening.
Tyre Shredder,Tyre Crusher,Tyre Shredding Machine Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
Technical Performance Parameters
Diameter Nominal
DN10Â ~Â DN1000
Nominal Pressure
0.6~4.0MPa(special pressure can be made to)
Accuracy
±0.3%, ±2mm/s (flowrate < 1m/s)
Liner material
PFA,F46,Neoprene,PTFE, FEP
Electrode material
Stainless steel SUS316, Hastelloy C, Titanium, Tantalum Platinum-iridium
Medium Temperature
Integral type
-10°C~+80°C
Split type
-25 - 180ºC
Ambient Temperature
-10ºC~60ºC
Medium Electrical conductivity
water 20μS/cm other medium 5μS/cm
Structure typeÂ
Integral type, split type
Protection Class
IP65,IP68(optional)
Product Standard
JB/T 9248-1999 Electormagnetic Flowmeter
Lining material
Main Performance
Applications
Teflon
1.The most steady material in plastics which is resistibal to boiling hydrochloricÂ
acid,vitriolandqua fortis as well as strong alkali and organic impregnates.       Â
2.Not be perfect in abrasion resistance.Strong corrosive mediums suchÂ
as strong acid and alkali
PFA
Having the same abrasion resistance with PTFE.
Having strong ability of load pressure resistance.Applicable in state of load pressure
F46
1.Have the same abrasion resistance with PTFE.
2.Resistable for low abrasion.
3.Having strong resistance to load pressure.  1.The same as PTFE.2.ApplicableÂ
in mediums of low abrasion.
 Neoprene
 1.Be of good elasticity,retractility and abrasion resistance.
2.Be resistant to low aicd,alkali and salt but not for oxidation mediums.Water,sewage and slurry,mineralÂ
serosity of low abrasion.
Polyurethane
1.Be of good abrasion resistibility.
2.Not be perfect in acid/alkali resisitance.
3.Can't be used for water mixed with organic impregnants.Applicable in mineral serosity,slurryÂ
and coal slurry of high abrasion.
Electrode material
Applications
Stainless steel SUS316
Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol,
chemistry,carbamide,etc
Stainless steel
covered with tungsten carbideApplicable in mediums of no corrosive and low abrasion.
  Hastelloy B(HB)
Having strong resistance to hydrochloric acid of any consistance which is below biolingÂ
piont. Also resistable against vitriol,phosphate,hydrofluoricacid,organic acid etc whichÂ
are oxidable acid,alkali and non-oxidable salt.
Hastelloy C(HC)
Be resistant to oxidable acid such as nitric acid,mixed acid as well as oxidable salt such as
 Fe+++,Cu++and sea water
Titanium
Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid(including
fuming nitric acid),organic acid,alkali etc.Not resistant to a pure reducing acid(such asÂ
sulphuric acid,hydrochloric acid)corrosion.But if acid contains antioxidant(such asÂ
Fe+++,Cu++)is greatly reduce corrosion.
Da
In addition to hydrofluoric acid, fuming sulfuric acid, alkali remaining outside chemicals,Â
including boiling hydrochloric acid
Platinum-iridium
Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt.
Clamp on Flow Meter Mechanical Flow Meter
Measuring Media: Liquid
Measuring Principle: Electrical Principles
Measurement Object: Closed Pipeline
Certification: CE, ISO
Body Material: Carbon Steel
Power Supply: 220V/24V
Communication: RS485
Signal Output: 4-20mA
Trademark: supmea
Transport Package: Standard Package
Origin: Zhejiang
High Quality Electromagnetic Flowmeter Used for Water and Sewage with Digital Display and 4-20mA Output/485