Channel I-Beam H-Steel Metal Tube Pipe Automatic Hydraulic Bending Machine

1.Features and Applications of Channel I-Beam H-Steel Metal Tube Pipe Automatic Hydraulic Bending Machine

WGJ250 type hydraulic cold bending machine is a new type of automatic bending equipment. The hydraulic system has the advantages of stable transmission, high pressure and so on, which can accurately locate and greatly improve the precision of the tunnel. WGJ250 type hydraulic bending machine is widely used in our country highway tunnel, railway tunnel, subway tunnel, water conservancy and hydropower diversion culvert, natural gas pipelines, communication pipeline, underground tunnels engineering and steel I-beam, channel steel bending.

2.Component of Channel I-Beam H-Steel Metal Tube Pipe Automatic Hydraulic Bending Machine

There are two main parts of the CNC bending machine, such as the bending arch unit, the numerical control control unit, the hydraulic control unit, the main motor and the reducer group. Passive roller and oil pump motor, gear pump, relief valve, solenoid valve, hydraulic cylinder, hydraulic components and other components.

3.New Features of Channel I-Beam H-Steel Metal Tube Pipe Automatic Hydraulic Bending Machine
1)control: CNC bending machine has PLC program controller control, the full hydraulic system can automatically read the manual control can also be NC control.
2)operation: unlimited feeding, can be returned, the cylinder size of the progress of the automatic positioning without manual measurement, automatic measurement of bending size
3)security: double automatic shutdown system, to achieve the specified size automatic shutdown, infrared braking system, automatic shutdown when no material.

Working Principle of Channel I-Beam H-Steel Metal Tube Pipe Automatic Hydraulic Bending Machine
Put on the I-beam camber machine, contacted with the roller reducer drive after the pressing handle feed lock, and then enter the chord height and minimum bending radius in NC hydraulic display, start point, also can automatically stop setting steel bending length of bending after how many, no material inductance is automatically shut down the construction is fast, safe and efficient. The active roller, the passive roller uses the special material, through the whole heat treatment, reduces the cruise ship to wear, does not scratch to the work piece, the service life is longer.

Main Parameter of Channel I-Beam H-Steel Metal Tube Pipe Automatic Hydraulic Bending Machine

Figure Images of Channel I-Beam H-Steel Metal Tube Pipe Automatic Hydraulic Bending Machine

Transmission Line Steel Tubular Tower

Our steel poles are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality. We have got 500kV Transmission Line Tubular Tower Quality Certificate from Power Industry Steel Tower Qualified Inspection & Test Center from 2009 year.

Transmission Line Steel Tubular Tower, Transmission Line Tower, Steel Tubular Tower, Mono Steel Tower

Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steelpolejl.com