Brake Disc Car Brake Cleaner

Model NO.: 400ml
Origin: Guangdong, China
HS Code: 3402209000
Model NO.: 400ml
Origin: Guangdong, China
HS Code: 3402209000
Removes brake fluid,oil,grease and dirt, cleans without disassembling unit, no residue
Contact:
We will reply your email or fax within 24 hours
You can call us at any time if there is any question on our production.
It is safe to use, moisture free, Non-corrosive, Non-flammable, it leaves no residue or condensation
It can use on: Cars, trucks, boats, commercial vehicles, aeroplanes, helicopters, around the office, devices, home and garage.]

Safely remove dust from: All- electronics- computer boards, fans, vents, keyboards, tablets, printers, flash drives, discs, TVs, mobile phones, cameras, lenses, optics, cases, watch repairs, engines, wiring, dashboards, display binnacles and all tricky tiny places.
 
Hold can in upright position
Spray approximately 25cm from the surface
For hard to reach areas simply attach extension tube




Brake Disc Car Brake Cleaner
Brake Disc Car Brake Cleaner
Brake Disc Car Brake Cleaner





Company Information:
Over 11-year manufacturing experience
With 15000 square meters
8 automatic filling line
Advanced producing and testing equipment 
Professional R&D team and service
8 Years OEM/ODM for the big international brands
Exporting experience in over 30countries;
Quality Guarantee: ISO9001; ISO22716, ISO14001, GMPc, FDA

Tentop Fine Chemical Co., Ltd., Zhongshan, was founded in 2007, is a professional engaged in aerosol research and development, manufacturing and service of national high-tech enterprises. Company covers an area of 15000 square meters, construction area of 9000 square meters, plant landscape is beautiful and harmonious, factory planning, workshop layout and production process in line with European Aerosol agent specification and national hazardous chemicals safety norms. Company has U.S.FDA GMPC good manufacturing practices through the control system certification, iso22716 cosmetics good production standard system certification, ISO9001 international quality management system certification, ISO14001 international environmental management system certification, at the same time, through the Watsons, Mannings, America's Wal Mart's third party factory audit.

Tentop blend of the company in a number of long-term aerosol working professionals, including the drafters of the participation of national standard, and the original national aerosol technology engineering center and the domestic famous aerosol business technology and production backbone members. The company has advanced reverse osmosis deionized water device and system perfection of dispensing equipment and domestic advanced full-automatic aerosol agent production line, and 1 00000 purification GMPC personal care aerosol workshop, the design scale of production capacity of 60 million cans per year. Company set up a 500 square meters R & D testing center, equipped with advanced R & D equipment and testing instruments, such as Shimadzu gc-14c gas chromatograph, 1 00000 purification microbiology laboratory and other professional testing equipment and facilities.

Tentop company is strong in research and development, in addition to create outstanding technical team, with Japan, South Korea, many research institutions established joint laboratory, a strong guarantee of technology R & D in the international cutting-edge of advanced level. Tentop in drafting national standards, including the aerosol production safety rules "and" aerosol products Test Method "; access to authorized by the State Intellectual Property Office of the national invention patent 5 utility model patents and 1, repeatedly won the Authority awarded the" China aerosol agent Innovation Award "and" China personal care and cosmetics Innovation Award "; in 2015 Tentop company has been identified as the" national high tech enterprise ", Tentop company R & D technology center has been identified as a" Zhongshan City, personal care and health care aerosol agent engineering technology center ".

Tentop companies adhere to the "responsibility to create value," the core values, heritage, responsibility, efficiency, leading the spirit of enterprise, based on "construction of a high starting point, high quality management, efficient operation, high standards of service" highland platform, standardized operation, scientific management, pioneering innovation, service excellence. Let us work together to create more health, beauty and happiness to consumers, and to promote aerosol industry to better benefit mankind!

We also can provide sample to you for free,and you need to pay the express fee.

Removes brake fluid,oil,grease and dirt, cleans without disassembling unit, no residue
Contact:
We will reply your email or fax within 24 hours
You can call us at any time if there is any question on our production.
It is safe to use, moisture free, Non-corrosive, Non-flammable, it leaves no residue or condensation
It can use on: Cars, trucks, boats, commercial vehicles, aeroplanes, helicopters, around the office, devices, home and garage.]

Safely remove dust from: All- electronics- computer boards, fans, vents, keyboards, tablets, printers, flash drives, discs, TVs, mobile phones, cameras, lenses, optics, cases, watch repairs, engines, wiring, dashboards, display binnacles and all tricky tiny places.
 
Hold can in upright position
Spray approximately 25cm from the surface
For hard to reach areas simply attach extension tube




Brake Disc Car Brake Cleaner
Brake Disc Car Brake Cleaner
Brake Disc Car Brake Cleaner





Company Information:
Over 11-year manufacturing experience
With 15000 square meters
8 automatic filling line
Advanced producing and testing equipment 
Professional R&D team and service
8 Years OEM/ODM for the big international brands
Exporting experience in over 30countries;
Quality Guarantee: ISO9001; ISO22716, ISO14001, GMPc, FDA

Tentop Fine Chemical Co., Ltd., Zhongshan, was founded in 2007, is a professional engaged in aerosol research and development, manufacturing and service of national high-tech enterprises. Company covers an area of 15000 square meters, construction area of 9000 square meters, plant landscape is beautiful and harmonious, factory planning, workshop layout and production process in line with European Aerosol agent specification and national hazardous chemicals safety norms. Company has U.S.FDA GMPC good manufacturing practices through the control system certification, iso22716 cosmetics good production standard system certification, ISO9001 international quality management system certification, ISO14001 international environmental management system certification, at the same time, through the Watsons, Mannings, America's Wal Mart's third party factory audit.

Tentop blend of the company in a number of long-term aerosol working professionals, including the drafters of the participation of national standard, and the original national aerosol technology engineering center and the domestic famous aerosol business technology and production backbone members. The company has advanced reverse osmosis deionized water device and system perfection of dispensing equipment and domestic advanced full-automatic aerosol agent production line, and 1 00000 purification GMPC personal care aerosol workshop, the design scale of production capacity of 60 million cans per year. Company set up a 500 square meters R & D testing center, equipped with advanced R & D equipment and testing instruments, such as Shimadzu gc-14c gas chromatograph, 1 00000 purification microbiology laboratory and other professional testing equipment and facilities.

Tentop company is strong in research and development, in addition to create outstanding technical team, with Japan, South Korea, many research institutions established joint laboratory, a strong guarantee of technology R & D in the international cutting-edge of advanced level. Tentop in drafting national standards, including the aerosol production safety rules "and" aerosol products Test Method "; access to authorized by the State Intellectual Property Office of the national invention patent 5 utility model patents and 1, repeatedly won the Authority awarded the" China aerosol agent Innovation Award "and" China personal care and cosmetics Innovation Award "; in 2015 Tentop company has been identified as the" national high tech enterprise ", Tentop company R & D technology center has been identified as a" Zhongshan City, personal care and health care aerosol agent engineering technology center ".

Tentop companies adhere to the "responsibility to create value," the core values, heritage, responsibility, efficiency, leading the spirit of enterprise, based on "construction of a high starting point, high quality management, efficient operation, high standards of service" highland platform, standardized operation, scientific management, pioneering innovation, service excellence. Let us work together to create more health, beauty and happiness to consumers, and to promote aerosol industry to better benefit mankind!

We also can provide sample to you for free,and you need to pay the express fee.

Multi Color Molding

In the silicone industry, to meet the user experience of the majority of consumers, multi-color products have always been the best-selling products, the process is used in silicon materials bonding and plastic bonding.

1. Soft and hard plastic two-color design
The two materials must have a certain temperature difference in the melting point. Generally, it is recommended to reach 60°. It is recommended to be at least 30°. The melting temperature of the first shot material is high. Generally, the first shot is PC or PC/ABS, and the second shot is TPU or TPE, PC thickness is 0.6-0.7mm, soft rubber part thickness is required to be 0.4mm or more.
Try to widen the contact area, make grooves to increase the adhesion, or use the core for the first shot, and the second part of the material is injected into the first shot. The surface of the first shot is as rough as possible.
2. Material compatibility
Multi-color injection molded mating materials must meet two basic compatibility conditions. They are compatible with the adhesive compatibility and processing.
3. Transparent and non-transparent two-shot design
(1) Double shot design of small lenses
The first shot is non-transparent, and the second shot is made of a lens. The first shot uses a PC with a high melting point and the second shot uses a PMMA.
(2) Transparent and non-transparent bijective design for decoration
The first shot is a non-transparent material, the second shot is a transparent material, and the non-transparent material is generally a high temperature of the PC material of SABIC, and the second shot transparent material is PMMA or PC. The PC needs to be sprayed with UV to protect it. PMMA can choose uv or fortification. If there are characters on the surface, you must choose UV

In the silicon bonding area, several silicon materials will be used to achieve different color silicon, different rubber components, so the multi_k color process is commonly used and is quite popular.

IMG_0564

Multi Color Molding,Multi Colour Injection Moulding,Multi Color Injection Molding,Multicolor Injection Molding

Suzhou FCE precision electronics Co., LTD , https://www.sjfukeyifcesz.com