1 Inch Automatic Fuel Nozzle

Fuel Nozzle

The automatic nozzle main body material is aluminum alloy.It sufficiently considers client's need when design.Small appearance, light, easy using and durable, suitable for gasoline,diesel,kerosene filling.

 

Features & Benefits

Working pressure:0.18MPa

Accurate flow control allows customers to top off their tank to the exact amount they want, and it's easy to stop gasoline flow precisely.

Easily replaced spout simply removes the screw.

Spout kits available.

Low profile aluminum body: light weight, easier to handle, provides an attractive, image enhancing appearance.

Hold-open rack available for full service applications.

One-hand control gives easy setting to flow rate for customer's convenience.

Exclusive pressure detecting module: the main valve can keep closed, even when held without enough pressure in hose.

Full hand insulator protects both nozzle and vehicle, and insulates users' hands.

Selective splash guard.

100% factory tested.

Packaging & Shipping

Our Servise

1. Your inquiry related to our products or prices will be replied within 24hours

2. Well-trained and experienced staffs to answer all your enquiries in fluent English.

3. Offering the support to solve the problem in the application or selling period.

4. Competitive prices based on same quality.

5. Guarantee samples quality same as mass production quality.
 

Our Promise

1. Welcome your 2D, 3D, and other drawings.

2. Not only manufacture mould, but aslo supply product.

3. IF you are interested in our products. please contact us at your any convenience .we'd like totell you more about our products.meantime,you only need to give us your requirements in detailfor your products.we can design and produce for you very well.

4. We warmly welcome your visit,as it is said to see is to believe if possible.

Company Information

 

Production process

 

 Certifications

Exhibition

 

Company Description:

 

We are professional manufacturer for fule tank accessories,chemical cart,gas station, oil depot accessories and other fule machine related accessories.

The products are mainly include:camplock coupling, API adaptor valve, vapor recovery valve, over fill prevention valve, manhole cover, fule nozzle, pressure vacuum valve,ball valve, etc.

 

It's with accuracy module, independent D&R ability, CNC machine, high quality control system.

 

We insist on"Innovation Decides Development" as company principal. The products are well received by demestic and overseas market. We will keep on enhancing the ability of independent research and develop to satisfy the customer's demand.

Tungsten Carbide Roller

Tungsten carbide roller has characteristics of good wear resistance, high temperature red hardness, thermal fatigue resistance and thermal conductivity and high strength , have been widely used in high-speed wire rod, bar, rebar, seamless steel tubes, etc. Domestic production of tungsten carbide roller materials mostly WC- Co, WC- Co- Ni- Cr two series, and the content of Co, Co- Ni - Cr is in the range of 6wt% ~ 30wt%. From the use of perspective, tungsten carbide rollers has good mechanical properties, its flexural strength up to 2200 MPa or more, shock toughness up (4 ~ 6) × 10^6 J/ m^2, Rockwell hardness (HRA) is up to 78 to 90, widely in the high-speed wire rod rolling process, which is much higher than single-slot chilled cast steel or high speed steel rolls.Tungsten carbide is made of Tungsten Carbide Powder and binder phase (such as drilling, nickel, etc.), and then pressing and sintering, regardless of the conditions under cold rolled or hot rolled has excellent wear resistance, tungsten carbide rollers has been widely used in pre-finishing mill and finishing of high-speed wire rod currently. On the performance of tungsten carbide roller in hot-rolling wire rod , the material must meet the following requirements:
1. Sufficient anti-fracture strength;
2. Good abrasion resistance;
3. The smooth surface finish;
4. Excellent corrosion resistance, thermal fatigue, thermal cracking performance.
Tungsten carbide roller rings can working in bad conditions , small profile rolling (especially rebar rolling) process conditions is harsher than the high-speed wire rod, and therefore corresponds to the profile rolling ,tungsten carbide rollers recommend using high binder phase carbide.

Tungsten carbide roller material design
Pre-finishing all vehicles roller should ensure its high toughness, strength, rigidity and thermal conductivity, followed before considering its wear resistance. When designing each vehicles roller, pre-finishing materials should choose carbide grades of Co, Co- Ni- Cr binder content is high (greater than or equal to 25wt%) , requiring an average WC grain size of coarse (5μm ~ 6μm), to obtain a higher shock toughness, proper strength and hardness. For the finishing of the roller movements, particularly the last two rollers of the finish rolling, which suffered load is small, and high relative velocity of the material to be pressed (80 m / min ~ 120 m / min). In this case, the wear resistance of the roller to be the most important requirements, and must ensure the strength , timpact toughness and hardness of a reasonable match, so the binder of Co / Ni content ratio and the average grain WC control of particle size and other factors must have greater control in front of different pre-finishing rolling roll.

Tungsten carbide roller category
According to the structure of tungsten carbide rollers, it can be divided into solid tungsten carbide roller and composite tungsten carbide roller. Solid tungsten carbide rollers have been widely used in pre-finishing and finishing stands high speed wire rod mill (including fixed reducing the rack, pinch roller rack). Composite tungsten carbide roller is made of cemented carbide and other materials, and it can be divided into tungsten carbide composite roll rings and solid tungsten carbide Composite Roller. Tungsten carbide composite roll rings mounted on the roller shaft; solid tungsten carbide composite roller will be directly cast in the roll axis to form a whole, a large load is applied to the rolling mill.

Tungsten carbide roller production process control
Tungsten carbide rollers produced by powder metallurgy method, the key to its process control is the chemical composition of the material and the mixture was prepared, pressed molding, sintering and deep processing and other preparation process parameters.
1. Preparation of starting material (WC focus quality): As the WC raw material and quality control of the use of different levels of quality may fluctuate, resulting in adverse effects on microstructure.
2. Preparation of the mixture: Mixture preparation is the key to the production process of the roller, the roller of failure modes - trachoma, mainly generated by this procedure.
3. Pressing: roller pressing is an important process of the roller mill.
4. Sintering: roller sintering is to determine the final quality of the roller production processes, use of advanced low-pressure sintering technology, HIP sintering technology can greatly improve the performance of roller.
5. Deep processing: deep processing rollers have a greater impact on the quality and accuracy of the roller surface.

Carbide Roller,Carbide Ring,Mill of Rolling Line,Steel Wire Rod,Mill Rolling Finish Stand,Mill Roller Groove Type

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcthermalspray.com